Alertfree — Indicators and Strategies

(2) Two Alerts Current Trading View free plan allows only ONE active alert. This simple indicator Allows to trigger this ONE and ONLY alert when price reaches Higher, or Lower price level. You can set levels and turn alerts for them on/off in settings, or by just drag-n-dropping Horizontal lines on the chart. To set the only alert you need to create new alert, and change it's following parameters : condition : 2alerts Any alert function() call Feel free to modify it on your needs.

Zindarra Multi Alerts Advanced (8 Symbols, 8 Levels) by RRB Zindarra Multi Alerts Advanced by RRB by RagingRocketBull 2018 Version 1.0 This indicator lets you configure multiple alert levels for several assets. Zindarra Multi Alerts Advanced supports 8 symbols with 8 custom alert levels. You can have an M:M relationship betweeen symbols and levels, for example: - 4 symbols each boxed by 2 alerts above/below the price - 3 symbols with 1 alert each - 2 symbols, 1st with 2 alerts, 2nd - with 6 alerts - 1 symbol with 8 alerts etc There are several versions: Simple, Pro, Advanced and Ultimate. This is the Advanced version. The Differences are listed below. - Simple: 10 Alert Levels, 1 plot mode, alert type: cross, no colors/triggered alerts - Pro: 9 Alert Levels, 2 plot modes: plot/price line, alert type: cross, +change/swap colors, +hide/disable triggered alerts, 2 penetration modes (close, high/low), trigger on confirmed close - Advanced: 8 Symbols/Tickers, 8 Alert Levels, +alert types: cross up/cross down, no color change. Display sources as lines/candles, normalize, scale/shift independently - Ultimate: 5 Symbols/Tickers, 8 Alert Levels, +alert types: volume/price %/abs change, volume/ema/time cross Features: - 8 custom symbols, symbols:levels = M:M - 8 custom alert levels with labels. For each alert there must be a corresponding non-empty symbol (can be a duplicate) - alert types: cross/cross up/cross down - normalize symbols (and alert levels) to 100% to compare, - scale and shift each symbol (and alert levels) to position on a chart independently - 1 alert levels plot mode: plot - 2 symbol types: line/candles - colorize symbol candles - high/low or close level penetration modes - show/hide levels/labels - keep or auto disable triggered alerts - trigger alerts only after a confirmed close You will see all symbols on a single chart at the same time with their corresponding alert levels. From this chart you can manage all alerts configured for multiple assets. Although TradingView has 2 percentage scale modes (Percent, Indexed to 100), somehow they still fail to be usefull when comparing multiple assets. This indicator lets you normalize all symbols to 100% making a direct single scale comparison between assets with vastly different price levels possible. All alert levels will be normalized as well. TradingView does not let you move the plots attached to left scale. When scaled they all remain stuck in the center and can't be moved vertically or relative to each other. This indicator lets you position all symbols independently using individual scale and shift settings. For example, you can: - split your screen in 3 horiz areas and have a symbol in each of them without overlapping or - have several partially overlapping assets with different scale each or - have all assets fully overlapping and normalized to the same 100% scale You have to manually create an alert in Manage Alerts Panel and configure it to use with this indicator. Free accounts are limited to only 1 alert slot and this indicator will take it (any existing alerts must be disabled/stopped). Once the alert is configured, the indicator can be removed from chart to free a slot for another indicator, but you won't see the alert levels. Usage: 1. attach indicator to a chart 2. define alert levels in UI settings 3. in TradingView's Manage Alerts panel on the right: - for free accounts: disable/stop all existing alerts, you are limited to 1 alert slot only. Otherwise you won't be able to save. - create a new Alert: - select 'Multi Alerts' indicator name in the Condition dropdown box, leave Level 1 and Multi Alerts Cross as default options - select 'Once Per Bar' or 'Once Per Minute' instead of 'Only Once' to trigger the alert multiple times 5. click Save. Your 9 alerts are enabled now. Change Settings: 1. change levels/settings in UI. Any changes will also reset already triggered levels visibility. 2. in Manage Alerts panel: - open/edit the alert you created - select new instance of 'Multi Alerts' indicator name in the Condition dropdown box (appears at the bottom) - check the Condition dropdown again - a single instance should remain selected. 3. click Save. Your alert settings are updated. Notes on using alerts: - attaching this indicator to a chart and configuring alert levels will not automatically enable the alerts - you have to manually create/configure a new alert in the Alerts Panel - removing this indicator from chart will not disable the alerts, you have to manually disable the alert you created in the Alerts Panel - your alert in the Alerts Panel uses another instance (copy) of indicator/settings. Any changes won't affect the alert. You have to manually update the alert every time you change any settings in the indicator. - recompiling and attaching your own version of indicator will require creating a new Alert (delete the old one). - alerts are designed to work in realtime. In replay mode you will see triggered alert levels hiding/changing colors but there will be no system alert messages. It's best to test the indicator in realtime on M1 (1 min) chart - you will only see 1 system alert per bar/60 sec when multiple alert levels are crossed with a single bar or across several symbols at the same time. However all of these levels will hide in the indicator as expected. - you can only see the alert levels when the indicator is attached to chart, they are not shown by the system alert. - For source=high/low a directional level penetration is used automatically (crossunder/low and crossover/high). For source=close a standard bidirectional cross is used unless another alert type is specified. - normalization breaks/distorts alert levels and symbol price - this is normal and is expected. To view the real price of alert levels uncheck normalize - the first 8 outputs are alert levels. Unnormalized levels are straight lines. - you will see alerts from all symbols in the system alert message box of the current symbol - a bit confusing, but there's no workaround, you can't have a customized alert message for each symbol/level - many tickers as arguments can stretch/break TradingView's Create New Alert dialog but it's still possible to push all required buttons and Save. - duplicate symbols will be displayed by default. You can manually hide duplicates using show/hide flags. - empty tickers (and corresponding alerts) are essentially disabled 1. uses plot*, cross*, barssince, highest, security, alertcondition

Zindarra Multi Alerts by RRB Zindarra Multi Alerts by RRB by RagingRocketBull 2018 Version 1.0 This indicator lets you configure multiple alert levels for an asset. Zindarra Multi Alerts supports 10 custom alert levels. You have to manually create an alert in Manage Alerts Panel and configure it to use with this indicator. Free accounts are limited to only 1 alert slot and this indicator will take it (any existing alerts must be disabled/stopped). Once the alert is configured, the indicator can be removed from chart to free a slot for another indicator, but you won't see the alert levels. This is the Zindarra Multi Alerts Simple version. You can't auto disable already triggered alerts in this indicator. All alerts will remain active. If you want to be able to hide/disable/change color of the triggered alert levels use the Zindarra Multi Alerts Pro version. Features: - 10 custom alert levels with labels - set open/high/low/close source point for level penetration - show/hide levels/labels Usage: 1. attach indicator to a chart 2. define alert levels in UI settings 3. in TradingView's Manage Alerts panel on the right: - for free accounts: disable/stop all existing alerts, you are limited to 1 alert slot only. Otherwise you won't be able to save. - create a new Alert: - select 'Multi Alerts' indicator name in the Condition dropdown box, leave Level 1 and Multi Alerts Cross as default options - select 'Once Per Bar' or 'Once Per Minute' instead of 'Only Once' to trigger the alert multiple times 5. click Save. Your 9 alerts are enabled now. Change Settings: 1. change levels/settings in UI 2. in Manage Alerts panel: - open/edit the alert you created - select new instance of 'Multi Alerts' indicator name in the Condition dropdown box (appears at the bottom) - check the Condition dropdown again - a single instance should remain selected. 3. click Save. Your alert settings are updated. Notes on using alerts: - attaching this indicator to a chart and configuring alert levels will not automatically enable the alerts - you have to manually create/configure a new alert in the Alerts Panel - removing this indicator from chart will not disable the alerts, you have to manually disable the alert you created in the Alerts Panel - your alert in the Alerts Panel uses another instance (copy) of indicator/settings. Any changes won't affect the alert. You have to manually update the alert every time you change any settings in the indicator. - recompiling and attaching your own version of indicator will require creating a new Alert (delete the old one). - alerts are designed to work in realtime. In replay mode you will see only the alert levels but there will be no system alert messages. It's best to test the indicator in realtime on M1 (1 min) chart - you will only see 1 system alert per bar/60 sec when multiple alert levels are crossed with a single bar. - you can only see the alert levels when the indicator is attached to chart, they are not shown by the system alert. - a standard bidirectional cross is used for all penetration sources 1. uses plot*, cross*, alertcondition

Zindarra Multi Alerts Pro (9 Levels) by RRB Zindarra Multi Alerts Pro by RRB by RagingRocketBull 2018 Version 1.0 This indicator lets you configure multiple alert levels for an asset. Zindarra Multi Alerts Pro supports 9 custom alert levels. You have to manually create an alert in Manage Alerts Panel and configure it to use with this indicator. Free accounts are limited to only 1 alert slot and this indicator will take it (any existing alerts must be disabled/stopped). Once the alert is configured, the indicator can be removed from chart to free a slot for another indicator, but you won't see the alert levels. If you want 10 alert levels and don't need colors and Pro features - use Multi Alerts Simple version instead. Features: - 9 custom alert levels with labels - 2 plot modes: plot and price line - high/low or close level penetration modes - show/hide levels/labels - change color based on level position above/below price - keep or auto disable triggered alerts - trigger alerts only after a confirmed close - swap level colors Usage: 1. attach indicator to a chart 2. define alert levels in UI settings 3. in TradingView's Manage Alerts panel on the right: - for free accounts: disable/stop all existing alerts, you are limited to 1 alert slot only. Otherwise you won't be able to save. - create a new Alert: - select 'Multi Alerts' indicator name in the Condition dropdown box, leave Level 1 and Multi Alerts Cross as default options - select 'Once Per Bar' or 'Once Per Minute' instead of 'Only Once' to trigger the alert multiple times 5. click Save. Your 9 alerts are enabled now. Change Settings: 1. change levels/settings in UI. Any changes will also reset already triggered level colors/visibility. 2. in Manage Alerts panel: - open/edit the alert you created - select new instance of 'Multi Alerts' indicator name in the Condition dropdown box (appears at the bottom) - check the Condition dropdown again - a single instance should remain selected. 3. click Save. Your alert settings are updated. Notes on using alerts: - attaching this indicator to a chart and configuring alert levels will not automatically enable the alerts - you have to manually create/configure a new alert in the Alerts Panel - removing this indicator from chart will not disable the alerts, you have to manually disable the alert you created in the Alerts Panel - your alert in the Alerts Panel uses another instance (copy) of indicator/settings. Any changes won't affect the alert. You have to manually update the alert every time you change any settings in the indicator. - recompiling and attaching your own version of indicator will require creating a new Alert (delete the old one). - alerts are designed to work in realtime. In replay mode you will see triggered alert levels hiding/changing colors but there will be no system alert messages. It's best to test the indicator in realtime on M1 (1 min) chart - you will only see 1 system alert per bar/60 sec when multiple alert levels are crossed with a single bar. However all of these levels will hide/change color in the indicator as expected. - plot modes: price line - changes color of the whole level, style is not configurable; plot - changes color of a level's segment after each cross, configurable style - you can only see the alert levels when the indicator is attached to chart, they are not shown by the system alert. - For source=high/low a directional level penetration is used automatically (crossunder/low and crossover/high). For source=close a standard bidirectional cross is used. Colors always change above/below close. 1. uses plot*, cross*, alertcondition