Carter — Indicators and Strategies

Multi-Timeframe TTM Squeeze Pro IMPORTANT NOTE: -> The timeframe for this indicator must be set at 1 minute; -> If the chart timeframe is higher than 1 minute, the results shown in the table for timeframes lower than the chart will not be correct; -> Tradingview's own documentation explains this as follows: " It is not recommended to request data of a timeframe lower that the current chart timeframe, for example 1 minute data from a 5 minutes chart. The main problem with such a case is that some part of a 1 minute data will be inevitably lost, as it’s impossible to display it on a 5 minutes chart and not to break the time axis. In such cases the behavior of security can be rather unexpected "; and -> It is therefore recommended that this indicator is placed in a standalone 1min chart window, and the window resized to only show the table to avoid any issues. Credits: -> John Carter creating the TTM Squeeze and TTM Squeeze Pro -> Lazybear's original interpretation of the TTM Squeeze: Squeeze Momentum Indicator -> Makit0's evolution of Lazybear's script to factor in the TTM Squeeze Pro upgrades - Squeeze PRO Arrows This is my version of their collective works, with amendments primarily to the Squeeze Conditions to more accurately reflect the color coding used by the official TMM Squeeze Pro indicator. TTM Squeeze Guide For those unfamiliar with the TTM Squeeze, it is simply a visual way of seeing how Bollinger Bands (standard deviations from a simple moving average ) relate to Keltner Channels ( average true range bands) compared with the momentum of the price action. The concept is that as Bollinger Bands compress within Keltner Channels , price volatility decreases, giving way for a potential explosive price movement up or down. Differences between the original TTM Squeeze and TTM Squeeze Pro: -> Both use a 2 standard deviation Bollinger Band ; -> The original squeeze only used a 1.5 ATR Keltner Channel; and -> The pro version uses 1.0, 1.5 and 2.0 ATR Keltner Channels . The pro version therefore helps differentiate between levels of squeeze (compression) as the Bollinger Bands moves through the Keltner Channels i.e. the greater the compression, the more potential for explosive moves - less compression means more squeezing. The Histogram shows price momentum whereas the colored dots (along the zeroline) show where the Bollinger Bands are in relation to the Keltner Channels: -> Cyan Bars = positive, increasing momentum; -> Blue Bars = positive, decreasing momentum (indication of a reversal in price direction); -> Red Bars = negative, increasing momentum; -> Yellow Bars = negative, decreasing momentum (indication of a reversal in price direction); -> Orange Dots = High Compression / large squeeze (One or both of the Bollinger Bands is inside the 1st (1.0 ATR) Keltner Channel); -> Red Dots = Medium Squeeze (One or both of the Bollinger Bands is inside the 2nd (1.5 ATR) Keltner Channel); -> Black Dots = Low compression / wide squeeze (One or both of the Bollinger Bands is inside the 3rd (2.0 ATR) Keltner Channels ); -> Green Dots = No Squeeze / Squeeze Fired (One or both of the Bollinger Bands is outside of the 3rd (2.0 ATR) Keltner Channel). Ideal Scenario: As the ticker enters the squeeze, black dots would warn of the beginning of a low compression squeeze. As the Bollinger bands continue to constrict within the Keltner Channels , red dots would highlight a medium compression. As the price action and momentum continues to compress an orange dot shows warning of high compression. As price action leaves the squeeze, the coloring would reverse e.g. orange to red to black to green. Any compression squeeze is considered fired at the first green dot that appears. Note: This is an ideal progression of the different types of squeezes, however any type of squeeze (and color sequence) may appear at anytime, therefore the focus is primarily on the green dots after any type of compression. Entry and Exit Guide: -> John Carter recommends entering a position after at least 5 black dots or wait for 1st green dot ; and -> Exit on second blue or yellow bar or, alternatively, remain in the position after confirming a continuing trend through a separate indicator. Standalone Indicator: The indicator (which can be used on any timeframe) can be found here:

[TTI] ATR channels HISTORY AND CREDITS Used by John Carter in his indicator’s toolbox. The ATR channels or the Keltner Channels represent the railroads or the natural movement of stocks. WHAT IT DOES Movements between the the The first multiplier lines (white) represent standard movement for the timeframe you are trading. Movements between the second multiplier (green/red lines) represent a 2stdv move of the stock in a single direction. Once a stock starts reaching the 3rd multiplier lines there’s an exponential chance that it will revert to the mean (cyan line) Additionally, we have added the Institutional lines. These are thought in a Small Account Mastery class 2019 by John Carter, as the levels heavily watched by institutions. The default settings represent what John is teaching but they can be further customised. HOW TO USE IT ATRs channels or Keltner Channels can be great source for target or stop losses and can be used as a indicator for confluence with other technical tools like the Fibonacci lines.

TTM Squeeze Pro Bars Credits: -> John Carter creating the TTM Squeeze and TTM Squeeze Pro -> Lazybear's original interpretation of the TTM Squeeze: Squeeze Momentum Indicator -> Makit0's evolution of Lazybear's script to factor in the TTM Squeeze Pro upgrades - Squeeze PRO Arrows This is my version of their collective works, with amendments primarily to the Squeeze Conditions to more accurately reflect the color coding used by the official TMM Squeeze Pro indicator. Rather than having a separate indicator window, the TTM Squeeze Pro is now overlaid on the price bars for easier viewing. For those unfamiliar with the TTM Squeeze, it is simply a visual way of seeing how Bollinger Bands (standard deviations from a simple moving average ) relate to Keltner Channels ( average true range bands) compared with the momentum of the price action. The concept is that as Bollinger Bands compress within Keltner Channels , price volatility decreases, giving way for a potential explosive price movement up or down. Differences between the original TTM Squeeze and TTM Squeeze Pro: -> Both use a 2 standard deviation Bollinger Band ; -> The original squeeze only used a 1.5 ATR Keltner Channel; and -> The pro version uses 1.0, 1.5 and 2.0 ATR Keltner Channels . The pro version therefore helps differentiate between levels of squeeze (compression) as the Bollinger Bands moves through the Keltner Channels i.e. the greater the compression, the more potential for explosive moves - less compression means more squeezing. The Histogram shows price momentum whereas the colored dots (along the zeroline) show where the Bollinger Bands are in relation to the Keltner Channels: -> Cyan Bars = positive, increasing momentum; -> Blue Bars = positive, decreasing momentum (indication of a reversal in price direction); -> Red Bars = negative, increasing momentum; -> Yellow Bars = negative, decreasing momentum (indication of a reversal in price direction); -> Orange Dots = High Compression / large squeeze (One or both of the Bollinger Bands is inside the 1st (1.0 ATR) Keltner Channel); -> Red Dots = Medium Squeeze (One or both of the Bollinger Bands is inside the 2nd (1.5 ATR) Keltner Channel); -> Black Dots = Low compression / wide squeeze (One or both of the Bollinger Bands is inside the 3rd (2.0 ATR) Keltner Channels ); -> Green Dots = No Squeeze / Squeeze Fired (One or both of the Bollinger Bands is outside of the 3rd (2.0 ATR) Keltner Channel). Ideal Scenario: As the ticker enters the squeeze, black dots would warn of the beginning of a low compression squeeze. As the Bollinger bands continue to constrict within the Keltner Channels , red dots would highlight a medium compression. As the price action and momentum continues to compress an orange dot shows warning of high compression. As price action leaves the squeeze, the coloring would reverse e.g. orange to red to black to green. Any compression squeeze is considered fired at the first green dot that appears. Note: This is an ideal progression of the different types of squeezes, however any type of squeeze (and color sequence) may appear at anytime, therefore the focus is primarily on the green dots after any type of compression. Entry and Exit Guide: -> John Carter recommends entering a position after at least 5 black dots or wait for 1st green dot ; and -> Exit on second blue or yellow bar or, alternatively, remain in the position after confirming a continuing trend through a separate indicator.

TTM Squeeze Pro Credits: -> John Carter creating the TTM Squeeze and TTM Squeeze Pro -> Lazybear's original interpretation of the TTM Squeeze: Squeeze Momentum Indicator -> Makit0's evolution of Lazybear's script to factor in the TTM Squeeze Pro upgrades - Squeeze PRO Arrows This is my version of their collective works, with amendments primarily to the Squeeze Conditions to more accurately reflect the color coding used by the official TMM Squeeze Pro indicator. For those unfamiliar with the TTM Squeeze, it is simply a visual way of seeing how Bollinger Bands (standard deviations from a simple moving average ) relate to Keltner Channels (average true range bands) compared with the momentum of the price action. The concept is that as Bollinger Bands compress within Keltner Channels, price volatility decreases, giving way for a potential explosive price movement up or down. Differences between the original TTM Squeeze and TTM Squeeze Pro: -> Both use a 2 standard deviation Bollinger Band ; -> The original squeeze only used a 1.5 ATR Keltner Channel; and -> The pro version uses 1.0, 1.5 and 2.0 ATR Keltner Channels . The pro version therefore helps differentiate between levels of squeeze (compression) as the Bollinger Bands moves through the Keltner Channels i.e. the greater the compression, the more potential for explosive moves - less compression means more squeezing. The Histogram shows price momentum whereas the colored dots (along the zeroline) show where the Bollinger Bands are in relation to the Keltner Channels: -> Cyan Bars = positive, increasing momentum; -> Blue Bars = positive, decreasing momentum (indication of a reversal in price direction); -> Red Bars = negative, increasing momentum; -> Yellow Bars = negative, decreasing momentum (indication of a reversal in price direction); -> Orange Dots = High Compression / large squeeze (One or both of the Bollinger Bands is inside the 1st (1.0 ATR) Keltner Channel); -> Red Dots = Medium Squeeze (One or both of the Bollinger Bands is inside the 2nd (1.5 ATR) Keltner Channel); -> Black Dots = Low compression / wide squeeze (One or both of the Bollinger Bands is inside the 3rd (2.0 ATR) Keltner Channels ); -> Green Dots = No Squeeze / Squeeze Fired (One or both of the Bollinger Bands is outside of the 3rd (2.0 ATR) Keltner Channel). Ideal Scenario: As the ticker enters the squeeze, black dots would warn of the beginning of a low compression squeeze. As the Bollinger bands continue to constrict within the Keltner Channels , red dots would highlight a medium compression. As the price action and momentum continues to compress an orange dot shows warning of high compression. As price action leaves the squeeze, the coloring would reverse e.g. orange to red to black to green. Any compression squeeze is considered fired at the first green dot that appears. Note: This is an ideal progression of the different types of squeezes, however any type of squeeze (and color sequence) may appear at anytime, therefore the focus is primarily on the green dots after any type of compression. Entry and Exit Guide: -> John Carter recommends entering a position after at least 5 black dots or wait for 1st green dot ; and -> Exit on second blue or yellow bar or, alternatively, remain in the position after confirming a continuing trend through a separate indicator.

TTM scalper indicator Backtest TTM scalper indicator of John Carter’s Scalper Buys and Sells. The methodology is a close approximation of the one described in his book Mastering the Trade. The book is highly recommended. Note the squares are not real-time but will show up once the third bar has confirmed a reversal. You can change long to short in the Input Settings WARNING: - For purpose educate only - This script to change bars colors.

TTM scalper indicator Strategy TTM scalper indicator of John Carter’s Scalper Buys and Sells. The methodology is a close approximation of the one described in his book Mastering the Trade. The book is highly recommended. Note the squares are not real-time but will show up once the third bar has confirmed a reversal. WARNING: - This script to change bars colors.

UCS_TTM - Reversion Bands Ok, Here we go - Version 1 of TTM Reversion Band goes live. Link to TTM Reversion Band - www.tradethemarkets.com Link to TTM Reversion Band Guide - kb.simplertrading.com John Carters Mastering the trade - www.amazon.com For the amount of information this has, the price tag is not hefty. John's RTM Chapter Synopsis - www.tradethemarkets.com What did I modify? 1. Automated the Daily + and Intraday settings. So Switching to intraday will change the setting automatically. 2. Added text callouts for RTM condition a. John Carter's Indicator b. Slope Based (my addition). Future Improvement Planned. 1. Will Convert this into a system based on John's Indicator from TS. 2. Custom Options for Slope and MA setting for Trade filter.

UCS_TTM_Wave A & B & C This is a replica of TTM Wave A B C. The ABC Waves are comprised of various moving averages and oscillators (MACD) used to visualize the overall strength and direction of a given market across multiple time frames. The “A Wave” measures short term relative strength and direction of a market, the “C Wave” measures longer term strength and the “B Wave” plots the same for a medium time period. Here is the link to the ACTUAL Indicator - members.simpleroptions.com Instruction - Load the Indicator three times, Turn Off the Other two Waves. For eg., Wave A - Check / Wave B - Uncheck / Wave C - Uncheck. = This will plot Wave A.