Digitalfilter — Indicators and Strategies

Filtered, N-Order Power-of-Cosine, Sinc FIR Filter [Loxx]Filtered, N-Order Power-of-Cosine, Sinc FIR Filter is a Discrete-Time, FIR Digital Filter that uses Power-of-Cosine Family of FIR filters. This is an N-order algorithm that allows up to 50 values for alpha, orders, of depth. This one differs from previous Power-of-Cosine filters I've published in that it this uses Windowed-Sinc filtering. I've also included a Dual Element Lag Reducer using Kalman velocity, a standard deviation filter, and a clutter filter. You can read about each of these below. Impulse Response What are FIR Filters? In discrete-time signal processing, windowing is a preliminary signal shaping technique, usually applied to improve the appearance and usefulness of a subsequent Discrete Fourier Transform. Several window functions can be defined, based on a constant (rectangular window), B-splines, other polynomials, sinusoids, cosine-sums, adjustable, hybrid, and other types. The windowing operation consists of multipying the given sampled signal by the window function. For trading purposes, these FIR filters act as advanced weighted moving averages. A finite impulse response (FIR) filter is a filter whose impulse response (or response to any finite length input) is of finite duration, because it settles to zero in finite time. This is in contrast to infinite impulse response (IIR) filters, which may have internal feedback and may continue to respond indefinitely (usually decaying). The impulse response (that is, the output in response to a Kronecker delta input) of an Nth-order discrete-time FIR filter lasts exactly {\displaystyle N+1}N+1 samples (from first nonzero element through last nonzero element) before it then settles to zero. FIR filters can be discrete-time or continuous-time, and digital or analog. A FIR filter is (similar to, or) just a weighted moving average filter, where (unlike a typical equally weighted moving average filter) the weights of each delay tap are not constrained to be identical or even of the same sign. By changing various values in the array of weights (the impulse response, or time shifted and sampled version of the same), the frequency response of a FIR filter can be completely changed. An FIR filter simply CONVOLVES the input time series (price data) with its IMPULSE RESPONSE. The impulse response is just a set of weights (or "coefficients") that multiply each data point. Then you just add up all the products and divide by the sum of the weights and that is it; e.g., for a 10-bar SMA you just add up 10 bars of price data (each multiplied by 1) and divide by 10. For a weighted-MA you add up the product of the price data with triangular-number weights and divide by the total weight. What is a Standard Deviation Filter? If price or output or both don't move more than the (standard deviation) * multiplier then the trend stays the previous bar trend. This will appear on the chart as "stepping" of the moving average line. This works similar to Super Trend or Parabolic SAR but is a more naive technique of filtering. What is a Clutter Filter? For our purposes here, this is a filter that compares the slope of the trading filter output to a threshold to determine whether to shift trends. If the slope is up but the slope doesn't exceed the threshold, then the color is gray and this indicates a chop zone. If the slope is down but the slope doesn't exceed the threshold, then the color is gray and this indicates a chop zone. Alternatively if either up or down slope exceeds the threshold then the trend turns green for up and red for down. Fro demonstration purposes, an EMA is used as the moving average. This acts to reduce the noise in the signal. What is a Dual Element Lag Reducer? Modifies an array of coefficients to reduce lag by the Lag Reduction Factor uses a generic version of a Kalman velocity component to accomplish this lag reduction is achieved by applying the following to the array: 2 * coeff - coeff The response time vs noise battle still holds true, high lag reduction means more noise is present in your data! Please note that the beginning coefficients which the modifying matrix cannot be applied to (coef whose indecies are < LagReductionFactor) are simply multiplied by two for additional smoothing . Whats a Windowed-Sinc Filter? Windowed-sinc filters are used to separate one band of frequencies from another. They are very stable, produce few surprises, and can be pushed to incredible performance levels. These exceptional frequency domain characteristics are obtained at the expense of poor performance in the time domain, including excessive ripple and overshoot in the step response. When carried out by standard convolution, windowed-sinc filters are easy to program, but slow to execute. The sinc function sinc (x), also called the "sampling function," is a function that arises frequently in signal processing and the theory of Fourier transforms. In mathematics, the historical unnormalized sinc function is defined for x ≠ 0 by sinc x = sinx / x In digital signal processing and information theory, the normalized sinc function is commonly defined for x ≠ 0 by sinc x = sin(pi * x) / (pi * x) For our purposes here, we are used a normalized Sinc function Included Bar coloring Loxx's Expanded Source Types Signals Alerts Related indicators Variety, Low-Pass, FIR Filter Impulse Response Explorer STD-Filtered, Variety FIR Digital Filters w/ ATR Bands STD/C-Filtered, N-Order Power-of-Cosine FIR Filter STD/C-Filtered, Truncated Taylor Family FIR Filter STD/Clutter-Filtered, Kaiser Window FIR Digital Filter STD/Clutter Filtered, One-Sided, N-Sinc-Kernel, EFIR Filt

Variety, Low-Pass, FIR Filter Impulse Response Explorer [Loxx]Variety Low-Pass FIR Filter, Impulse Response Explorer is a simple impulse response explorer of 16 of the most popular FIR digital filtering windowing techniques. Y-values are the values of the coefficients produced by the selected algorithms; X-values are the index of sample. This indicator also allows you to turn on Sinc Windowing for all window types except for Rectangular, Triangular, and Linear. This is an educational indicator to demonstrate the differences between popular FIR filters in terms of their coefficient outputs. This is also used to compliment other indicators I've published or will publish that implement advanced FIR digital filters (see below to find applicable indicators). Inputs: Number of Coefficients to Calculate = Sample size; for example, this would be the period used in SMA or WMA FIR Digital Filter Type = FIR windowing method you would like to explore Multiplier (Sinc only) = applies a multiplier effect to the Sinc Windowing Frequency Cutoff = this is necessary to smooth the output and get rid of noise. the lower the number, the smoother the output. Turn on Sinc? = turn this on if you want to convert the windowing function from regular function to a Windowed-Sinc filter Order = This is used for power of cosine filter only. This is the N-order, or depth, of the filter you wish to create. What are FIR Filters? In discrete-time signal processing, windowing is a preliminary signal shaping technique, usually applied to improve the appearance and usefulness of a subsequent Discrete Fourier Transform. Several window functions can be defined, based on a constant (rectangular window), B-splines, other polynomials, sinusoids, cosine-sums, adjustable, hybrid, and other types. The windowing operation consists of multipying the given sampled signal by the window function. For trading purposes, these FIR filters act as advanced weighted moving averages. A finite impulse response (FIR) filter is a filter whose impulse response (or response to any finite length input) is of finite duration, because it settles to zero in finite time. This is in contrast to infinite impulse response (IIR) filters, which may have internal feedback and may continue to respond indefinitely (usually decaying). The impulse response (that is, the output in response to a Kronecker delta input) of an Nth-order discrete-time FIR filter lasts exactly {\displaystyle N+1}N+1 samples (from first nonzero element through last nonzero element) before it then settles to zero. FIR filters can be discrete-time or continuous-time, and digital or analog. A FIR filter is (similar to, or) just a weighted moving average filter, where (unlike a typical equally weighted moving average filter) the weights of each delay tap are not constrained to be identical or even of the same sign. By changing various values in the array of weights (the impulse response, or time shifted and sampled version of the same), the frequency response of a FIR filter can be completely changed. An FIR filter simply CONVOLVES the input time series (price data) with its IMPULSE RESPONSE. The impulse response is just a set of weights (or "coefficients") that multiply each data point. Then you just add up all the products and divide by the sum of the weights and that is it; e.g., for a 10-bar SMA you just add up 10 bars of price data (each multiplied by 1) and divide by 10. For a weighted-MA you add up the product of the price data with triangular-number weights and divide by the total weight. What's a Low-Pass Filter? A low-pass filter is the type of frequency domain filter that is used for smoothing sound, image, or data. This is different from a high-pass filter that is used for sharpening data, images, or sound. Whats a Windowed-Sinc Filter? Windowed-sinc filters are used to separate one band of frequencies from another. They are very stable, produce few surprises, and can be pushed to incredible performance levels. These exceptional frequency domain characteristics are obtained at the expense of poor performance in the time domain, including excessive ripple and overshoot in the step response. When carried out by standard convolution, windowed-sinc filters are easy to program, but slow to execute. The sinc function sinc (x), also called the "sampling function," is a function that arises frequently in signal processing and the theory of Fourier transforms. In mathematics, the historical unnormalized sinc function is defined for x ≠ 0 by sinc x = sinx / x In digital signal processing and information theory, the normalized sinc function is commonly defined for x ≠ 0 by sinc x = sin(pi * x) / (pi * x) For our purposes here, we are used a normalized Sinc function Included Windowing Functions N-Order Power-of-Cosine (this one is really N-different types of FIR filters) Hamming Hanning Blackman Blackman Harris Blackman Nutall Nutall Bartlet Zero End Points Bartlet-Hann Hann Sine Lanczos Flat Top Rectangular Linear Triangular If you wish to dive deeper to get a full explanation of these windowing functions, see here: en.wikipedia.org Related indicators STD-Filtered, Variety FIR Digital Filters w/ ATR Bands STD/C-Filtered, N-Order Power-of-Cosine FIR Filter STD/C-Filtered, Truncated Taylor Family FIR Filter STD/Clutter-Filtered, Kaiser Window FIR Digital Filter STD/Clutter Filtered, One-Sided, N-Sinc-Kernel, EFIR Filt

FATL, SATL, RFTL, & RSTL Digital Filters Raw [Loxx]FATL, SATL, RFTL, & RSTL Digital Filters Raw is an indicator to showcase FATL, SATL, RFTL, & RSTL Digital Filters with their raw output values. The coefficients used here are for an idealized environment. This is tuned for Forex. What is FATL? FATL (Fast Adaptive Trend Line) is calculated using low frequency digital filter (FLF-1). FLF-1 filter is necessary for high frequency noises suppression and reduction of market cycles with a very short volatility periods that can also be considered as a noise. Filters of low frequency FLF-1 and FLF-2 provide attenuation in the stop band with no less than 40 dB and absolutely don’t distort the amplitude and phase of entry discontinuous price series in the pass band (bandwidth). These properties of the digital filters provide significantly improved (in comparison with simple moving average) noise suppression that in its turn allows reducing sharply the probability of appearance "false" signals for buy and sell. There are no analogues to FATL among widely known technical instruments. It is not a moving "average", but just the adaptive lines estimates of the short-term trends. Unlike moving "average", FATL has no any phase delay with regard to current prices. What is SATL? Slow Adaptive Trend Line (SATL) is formed with the digital filter of the low frequency FLF-2. Filter FLF-2 serves to suppress noises and market cycles with longer periods of oscillation. Filters of low frequency FLF-1 and FLF-2 provide attenuation in the stop band with no less than 40 dB and absolutely don’t distort the amplitude and phase of entry discontinuous price series in the pass band (bandwidth). These properties of the digital filters provide significantly improved (in comparison with simple moving average) noise suppression that in its turn allows reducing sharply the probability of appearance of "false" signals for purchase and sell. There are no analogues to SATL among widely known technical instruments. This is not a moving "average", but just the adaptive line estimate of a long-term trend. Unlike moving average, SATL has no any phase delay with regard to current prices. What is RFTL? Reference Fast Trend Line (RFTL) is a response of FLF-1 and FLF-2 digital filters to the input discrete sequence. This response is set with the delay equal to the Nyquist TNi range. RFTL reference line is an equivalent of simple moving "averages" from the viewpoint of their delay relative to the current prices. Mentioned similarity would have been complete, in case we use an impulse parameter having 1/N weights that corresponds to the procedure of the dotted moving smoothing instead of the complicated FLF impulse parameters. What is RSTL? Reference Slow Trend Line (RSTL) is a response of the SATL digital filter to the series of input prices with a delay equal to the Nyquist interval of 1/2F.