Non-repaint — Indicators and Strategies

Adaptive Fisherized KST Introduction Heyo guys, here is a new adaptive fisherized indicator of me. I applied Inverse Fisher Transform, Ehlers dominant cycle analysis, smoothing and divergence analysis on the Know Sure Thing (KST) indicator. Moreover, the indicator doesn't repaint. Usage I didn't backtest the indicator, but I recommend the 5–15 min timeframe. It can be also used on other timeframs, but I have no experience with that. The indicator has no special filter system, so you need to find an own combo in order to build a trading system. A trend filter like KAMA or my Adaptive Fisherized Trend Intensity Index could fit well. If you find a good combo, let me know it in the comments pls. Signals Zero Line KST crossover 0 => Enter Long KST crossunder 0 => Enter Short Cross KST crossover KST MA => Enter Long KST crossunder KST MA => Enter Short Cross Filtered KST crossover KST MA and KST above 0 => Enter Long KST crossunder KST MA and KST under 0 => Enter Short KST crossunder 0 => Exit Long KST crossover 0 => Exit Short More to read: KST Explanation Enjoy and let me know your opinion! -- Credits to - @tista - @blackcat1402 - @DasanC - @cheatcountry

Adaptive Fisherized CMF Introduction Heyo, here I made a normalized Chaikin Money Flow (CMF) indicator with Inverse Fisher Transform (IFT) and some smoothing techniques. I had to normalize the indicator in order to fit it to the IFT range (-1 -> 1). Moreover, the good old adaptive mode is also included in this indicator. It uses Ehlers superb dominant cycle techniques. It also has divergence detection, several options for individualisation and doesn't repaint. Usage www.investopedia.com Signals CMF above 0 => bullish market CMF below 0 => bearish market (You can also use the inner bands instead of the zero line, to make these signals more precise) Bullish regular/hidden divergence => long Bearish regular/hidden divergence => short Enjoy guys! PS: I really would like to hear some feedback of you.

Adaptive Fisherized Stochastic Center of Gravity Introduction I modified the script "Fisher Stochastic Center of Gravity" of @DasanC for this indicator. I added inverse Fisher transform, cycle period adaptiveness mode (Ehlers) and smoothing to it. Moreover, I added buy and sell and beautified some stuff. Lastly, it is also non-repainting! Usage This indicator can be used like a normal stochastic, but I don't recommend divergence analysis on it. That fisherization stuff seems to make the graphs unuseable for that because it tries. It works well on every timeframe I would say, but lower timeframes are recommended, because of the fast nature of stochastic. Usually it does a good job on entry confirmation for reversals and trend continuation trades. Recommended indicator to combine with this indicator is RSI cyclic smoothed v2 . This is the best RSI version I know. In trending market it is recommended to look more on the inner bands and in flat market it is recommended to look more on the outer bands. When RSI shows oversold and this indicator shows a crossover of the Center of Gravity plot through the bottom line -> Long entry is confirmed When RSI shows overbought and this indicator shows a crossunder of the Center of Gravity plot through the top line -> Short entry is confirmed Settings The adaptive mode is enabled by default to give you straight the whole indicator experience. The default settings are optimized, but should be changed depending on the market. An example: Market has a low volatility and a high momentum -> I want a slower/higher length to catch the slower new highs and lows. Market has higher volatility and a low momentum, -> I want a faster/lower length to catch the faster new highs and lows Signals Crossover Buy -> cog crossover signalLine Sell -> cog crossunder signalLine Overbought/Oversold Crossover Buy -> cog crossover lowerBand Sell -> cog crossunder lowerBand I use this indicator a lot, because I don't know a better stochastic on this community here. @DasanC did an awesome work with his version I used as base for this script. Enjoy this indicator and let the profit roll! 🔥

Candlestick OB Finder Introduction Hello, this here is a non-repainting candlestick indicator which is able to detect OB looking candlestick formations. Usage It can be used to confirm entries, but be aware that it produces a lot of false signals. Somehow the swings tend to reverse at these points. I recommend the 10–15 minutes timeframe. I hope you enjoy this small indicator. :)

Fisherized CCI Introduction This here is a non-repainting indicator where I use inverse Fisher transformation and smoothing on the well-known CCI (Commdity Channel Index) momentum indicator. "The Inverse Fisher Transform" describes the calculation and use of the inverse Fisher transform by Dr . Ehlers in 2004. The transform is applied to any indicator with a known probability distribution function. It enables to transform an indicator signal into the range between +1 and -1. This can help to eliminate the noise of an indicator. The CCI is an momentum indicator which describes the distance of the price to the average price. For smoothing I used the Hann Window and NET (Noise Elimination Technique) methods. Additional Features Divergence Analysis Trend-adaptive Histogram Timeframe selection Usage It is usually used to spot potential trend reverals or mean-reversion (against the trend) trades on lower timeframes. IMO it can be even used to spot trend-following trades. It always depends on which settings you have, which timeframe do you use and which indicators you combine with it. The suggested timeframe for this indicator is 15 min (with the length setting on 50). The histogram with adaptive mode enabled could be used as filter applied on the buy and sell signals. The divergence analysis can help to spot additional entries/exits or confirm the buy and sell signals. Always try to find the best settings! This indicators has a lot of customization options you should take advantage of. Signals The indicator uses the following logic to generate the buy and sell signals: Normal Buy -> When CCI and MA go above the top band (usually +100) and cross Sell -> When CCI and MA go below the the bottom band (usually -100) and cross Fisherized Buy -> When CCI and MA go above the the zero line and cross Sell -> When CCI and MA go below the the zero line and cross Have fun with the indicator! I am open for feedback and questions. :)

Bjorgum MTF MA Scope: Up to 3 MA's can be applied at the users discretion Choose between 10 different average types including favorites from the Bjorgum series from HEMA to Reversal T3's Each MA can be independently set Go Multi-timeframe! Any MA can be set to any timeframe of reference you choose (ex. using 3 different timeframes of higher resolution to your chart reference to establish a multi-time frame trend) RSI HEATMAP. Use the bar color or the MA color selection toggle to set your color to reference RSI on a gradient. This helps to establish clear visual reference to momentum on top of trend analysis Assigning RSI bar color to an MA of a higher time frame can allow you to see visual reference of momentum of the greater trend that may be at play. Example: trying to get short on a 15min while your 1hr and 4hr RSI Heatmap burns deep in oversold. RSI color can be assigned to the bar color, the MA (1,2 or 3), or both. Alternatively, bar color can be assigned to a more simple rising/ falling MA color and price above/ below the MA for bar color. ALL MTF FUNCTIONS ARE NON_REPAINTING. The Idea The original inspiration behind the script came from an observation of a constant struggle of Pinecoders of both youth or experience to find accurate multi-timeframe indicators that do not repaint, and appear as should on historical bars, while performing reliably in real time. I encourage you to scroll the Pinecoders FAQ on a recent piece explaining the difficulties and caveats of different approaches, but I would like to reference the elimination of the historical bar offset for THIS purpose. MA's are based on closing prices, that is to say they are confirmed and will not change once the bar has closed. There is no need to offset these for historical reference. The purpose of the historical offset is best exemplified, for example, with an intraday strategy involving daily breakouts. Let's entertain going long on a break to a new daily high. We would not know that in real time so we need to reference the previous bars close for BACKTESTING purposes, otherwise we get "lookahead bias". There is no shortage of strategies unintentionally employing this bias out there (I'm sure you have come across them with their unrealistic results). There is no worry of repainting with the MTF security function included within this script, nor will it offset for something involving lookahead bias. I encourage those that are playing with the code or perhaps writing strategies of their own to borrow the functions within. There is also a function that will return the 10 MA variable selection - yours to keep. With all that in mind, I wanted a practical script that is easily deployable in everyday trading for the average trader that gives the user a firm grip on their trading steering wheel equipped with the feel of the road. Incorporating several MA's of differing times with the RSI heatmap gives a good visual reference and feel to your trading environment, while offering a level of customization that will fit an individuals personal trading style. The RSI heatmap gradient is per percentage between 30 and 70 and your 2 colors - anything outside of those levels gives you the vibrant bias color Below I walk through 2 examples of live trades scenarios I made using the mindset the script offers. The Trade LONG IZEA Timeframe: 4hr chart - 3 Tilson MA's of varying length are deployed at varying intraday time frames - A bullish pattern in an uptrend offers a possible trade allowing entry from a low risk point from the pattern low - See the chart for notes and observations using the script - Notice how the heatmap brightens up as price extends far away from the averages - your risk has elevated for a new position - Notice the heatmap cool off while price action consolidates sideways The Trade SHORT BTCUSDT Timeframe: 4hr chart - 3 EMAs are employed - same length (50), with 3 successive timeframe resolutions - A downtrend is formed with a sharp move to stack the EMAs into layers - A pull back opportunity presents itself in bearish consolidation - Notice a Doji star at resistance establishing a swing high as RSI cools off into the EMA dynamic resistance for entry - An '"equal legs" measured move can be used for a trade target with a stop out above the swing high. - Again, take note of distance from EMA's, the heatmap in combination with trend development surrounding the MA's These were just two ideas to show you an example of how to implement some strategy into your trading and to get some interesting use from the indicator. Hope you enjoyed the read and happy trading.