Pointandfigurecharting — Indicators and Strategies

Point and Figure Displacement Indicator The PnF Displacement indicator is my custom script for TradingView, designed to analyze Point and Figure (PnF) charts with displacement features. Key components of the script include: User Inputs: Require FVG: A boolean input to determine if a Fair Value Gap (FVG) is required for displacement calculations. Displacement Type: Allows users to choose between "Open to Close" and "High to Low" for column range calculations. Displacement Length: Defines how far back to look for calculating the standard deviation of the column range. Displacement Strength: Multiplier for the standard deviation to adjust sensitivity. Box Size: Sets the size of each box in the PnF chart. Number of Boxes for Minimum Displacement: Specifies how many boxes to consider for calculating the minimum displacement. Displacement Logic: The script calculates the column range based on the selected displacement type. It computes a standard deviation of the candle range and determines a minimum displacement based on user-defined box size and count. The displacement condition combines the FVG check and the column range against the calculated minimum. Visual Representation: The bars are colored based on displacement conditions, enhancing visual analysis on the chart. This indicator aids traders in identifying significant price movements in PnF charts while incorporating user customization options for better analysis.

PnF Bullish & Bearish Trend Line Indicator with Proximity Alert This Pine Script indicator, "PnF Bullish and Bearish Trend line Proximity Alert," overlays on a trading chart to monitor and alert users about interactions with bullish and bearish trend lines derived from Point and Figure (PnF) charting. Key Features: Inputs: Users can set parameters such as box size, bullish and bearish angles (in degrees), and a proximity threshold for detecting touches. Slope Calculation: The script calculates the slopes for bullish and bearish trendlines using the tangent of the specified angles. Trendline Management: It initializes and updates trend lines based on price interactions, adjusting their starting points and positions as conditions change. Proximity Detection: The indicator checks if the current price is close enough to the trend lines and sets conditions for alerts. Alerts: Users receive alerts when both trend lines are touched, enhancing decision-making for trading strategies. Visual Feedback: It highlights areas where both trend lines are touched and plots the trend lines in distinct colors for clarity. This indicator provides an effective way to track key price levels and potential trend reversals in the market.

Point and Figure Chart - Live Hello Traders, This is "Point and Figure Chart (PnF)" script that run in separated window in real time. The separated PnF chart window is timeless, so no relation with the time on the chart. PnF chart consist of "X" and "O" columns. While "X" columns represents rising prices, "O" column represents a falling price. If you have no idea about what PnF charting is then you should search for "Point and Figure Charting" on the net and get some info before using this script. Now lets talk about details. PnF Chart requires at least two variables to be set => Box size and Reversal. Box size represents the size of each X/O in PnF chart and the reversal is used to calculate new X/O or reversal. for example if currrent column is X column then for new "X", "box size * 1" move is needed and for new "O" column or reversal, "box size * revelsal" move is needed. in the script I use lines as X/O columns. In the options you can set "Box Size Assingment Method". you have 3 options Traditional, ATR, Percentage . what are they? Traditional: user-defined box size, means you can set the box size as you wish, using the option . if you use this option then you should set it accordingly. ATR : that's dynamic box size scaling and on each columns it's calculated once, you can set length for ATR Percentage: that's also dynamic box size scaling according to closing price when new column appeared. if you use this option then you should set it accordingly. Reversal: The reversal is typically 3 but you can change it as you wish "Change Bar Color by PnF Trend": if you enable this option then bar color changes by PnF columns, by default it's not enabled "Change Column Color When Breakout Occurs": PnF color changes if Double Top/Bottom breakout accours. enabled by default and you can set the colors as you wish using the options "Change Bar Color When Breakout Occurs": bar colors changed if Double Top/Bottom breakout accours. enabled by default and you can set the colors as you wish using the options the script checks only Double Top/Bottom breakouts at the moment. there are many other breakouts such Triple/Quadruple, Ascending/Descending Triple Top/Bottom breakouts, Catapult etc. Also the script shows new X/O level and reversal Levels in PnF window. An example: If you enable "Change Bar Color by PnF Trend" option: An example if you disable the option "Change Column Color When Breakout Occurs You may want to see my another/older "Point and Point Chart" script as well. you can find it in my profile/published scripts and in the Public Library. I use same PnF calculation algorithm in both scripts. Enjoy!

[RESEARCH] Point-and-Figure (P&F) Chart Identifier (Republishing of the hidden script) A heuristic approach to identify P&F chart type. Catches all variations. Works correctly with other chart types: Classic Candles Heikin-Ashi Line Break Kagi ATR Renko Traditional Renko Range Bars

Point and Figure (PnF) CCI This is live and non-repainting Point and Figure Chart Commodity Channel Index - CCI tool. The script has it’s own P&F engine and not using integrated function of Trading View. Point and Figure method is over 150 years old. It consist of columns that represent filtered price movements. Time is not a factor on P&F chart but as you can see with this script P&F chart created on time chart. P&F chart provide several advantages, some of them are filtering insignificant price movements and noise, focusing on important price movements and making support/resistance levels much easier to identify. Commodity Channel Index – CCI was developed by Donalt Lambert. CCI can be used to identify overbought or oversold, a new trend or warn of extreme conditions. CCI measures the difference between a security's price change and its average price change. High positive readings indicate that prices are well above their average, which is a show of strength. Low negative readings indicate that prices are well below their average, which is a show of weakness. The Formula for the Commodity Channel Index ( CCI ) Is: CCI = (Typical Price – L-period SMA of TP) / (0.015 * Mean Deviation) Mean Deviation = (SumOf 1->L ( |TP – MA| )) / L L = Length TP = Typical Price If you are new to Point & Figure Chart then you better get some information about it before using this tool. There are very good web sites and books. Please PM me if you need help about resources. Options in the Script Box size is one of the most important part of Point and Figure Charting. Chart price movement sensitivity is determined by the Point and Figure scale. Large box sizes see little movement across a specific price region, small box sizes see greater price movement on P&F chart. There are four different box scaling with this tool: Traditional, Percentage, Dynamic (ATR), or User-Defined 4 different methods for Box size can be used in this tool. User Defined: The box size is set by user. A larger box size will result in more filtered price movements and fewer reversals. A smaller box size will result in less filtered price movements and more reversals. ATR: Box size is dynamically calculated by using ATR, default period is 20. Percentage: uses box sizes that are a fixed percentage of the stock's price. If percentage is 1 and stock’s price is $100 then box size will be $1 Traditional: uses a predefined table of price ranges to determine what the box size should be. Price Range Box Size Under 0.25 0.0625 0.25 to 1.00 0.125 1.00 to 5.00 0.25 5.00 to 20.00 0.50 20.00 to 100 1.0 100 to 200 2.0 200 to 500 4.0 500 to 1000 5.0 1000 to 25000 50.0 25000 and up 500.0 Default value is “ATR”, you may use one of these scaling method that suits your trading strategy. If ATR or Percentage is chosen then there is rounding algorithm according to mintick value of the security. For example if mintick value is 0.001 and box size (ATR/Percentage) is 0.00124 then box size becomes 0.001. And also while using dynamic box size (ATR or Percentage), box size changes only when closing price changed. Reversal : It is the number of boxes required to change from a column of Xs to a column of Os or from a column of Os to a column of Xs. Default value is 3 (most used). For example if you choose reversal = 2 then you get the chart similar to Renko chart. Source: Closing price or High-Low prices can be chosen as data source for P&F charting. Upper Band : as default, Upper band is 100 Lower Band : as default, Lower band is -100 There are alerts when P&F CCI moves above Upper Band or moves below Lower Band.

Point and Figure (PnF) RSI This is live and non-repainting Point and Figure Chart RSI tool. The script has it’s own P&F engine and not using integrated function of Trading View. Point and Figure method is over 150 years old. It consist of columns that represent filtered price movements. Time is not a factor on P&F chart but as you can see with this script P&F chart created on time chart. P&F chart provide several advantages, some of them are filtering insignificant price movements and noise, focusing on important price movements and making support/resistance levels much easier to identify. P&F RSI is calculated and shown by using its own P&F engine. If you are new to Point & Figure Chart then you better get some information about it before using this tool. There are very good web sites and books. Please PM me if you need help about resources. Options in the Script Box size is one of the most important part of Point and Figure Charting. Chart price movement sensitivity is determined by the Point and Figure scale. Large box sizes see little movement across a specific price region, small box sizes see greater price movement on P&F chart. There are four different box scaling with this tool: Traditional, Percentage, Dynamic (ATR), or User-Defined 4 different methods for Box size can be used in this tool. User Defined: The box size is set by user. A larger box size will result in more filtered price movements and fewer reversals. A smaller box size will result in less filtered price movements and more reversals. ATR: Box size is dynamically calculated by using ATR, default period is 20. Percentage: uses box sizes that are a fixed percentage of the stock's price. If percentage is 1 and stock’s price is $100 then box size will be $1 Traditional: uses a predefined table of price ranges to determine what the box size should be. Price Range Box Size Under 0.25 0.0625 0.25 to 1.00 0.125 1.00 to 5.00 0.25 5.00 to 20.00 0.50 20.00 to 100 1.0 100 to 200 2.0 200 to 500 4.0 500 to 1000 5.0 1000 to 25000 50.0 25000 and up 500.0 Default value is “ATR”, you may use one of these scaling method that suits your trading strategy. If ATR or Percentage is chosen then there is rounding algorithm according to mintick value of the security. For example if mintick value is 0.001 and box size (ATR/Percentage) is 0.00124 then box size becomes 0.001. And also while using dynamic box size (ATR or Percentage), box size changes only when closing price changed. Reversal : It is the number of boxes required to change from a column of Xs to a column of Os or from a column of Os to a column of Xs. Default value is 3 (most used). For example if you choose reversal = 2 then you get the chart similar to Renko chart. Source: Closing price or High-Low prices can be chosen as data source for P&F charting. you can use PNF type RSI or RENKO type RSI. What is the difference between them? While calculating PNF type RSI, the script checks last X/O column's closing price but when using RENKO type RSI the scipt calculates RSI on every price changes according to number of boxes. and also with RENKO type RSI, calculation is made for each boxes on price changes. Important note if you use this PNF script with reversal = 2 then you get RENKO chart. So, with this RENKO chart better to use RENKO type RSI ;)

Point and Figure (PnF) Chart This is live and non-repainting Point and Figure Charting tool. The tool has it’s own P&F engine and not using integrated function of Trading View. Point and Figure method is over 150 years old. It consist of columns that represent filtered price movements. Time is not a factor on P&F chart but as you can see with this script P&F chart created on time chart. P&F chart provide several advantages, some of them are filtering insignificant price movements and noise, focusing on important price movements and making support/resistance levels much easier to identify. If you are new to Point & Figure Chart then you better get some information about it before using this tool. There are very good web sites and books. Please PM me if you need help about resources. Options in the Script Box size is one of the most important part of Point and Figure Charting. Chart price movement sensitivity is determined by the Point and Figure scale. Large box sizes see little movement across a specific price region, small box sizes see greater price movement on P&F chart. There are four different box scaling with this tool: Traditional, Percentage, Dynamic (ATR), or User-Defined 4 different methods for Box size can be used in this tool. User Defined: The box size is set by user. A larger box size will result in more filtered price movements and fewer reversals. A smaller box size will result in less filtered price movements and more reversals. ATR: Box size is dynamically calculated by using ATR, default period is 20. Percentage: uses box sizes that are a fixed percentage of the stock's price. If percentage is 1 and stock’s price is $100 then box size will be $1 Traditional: uses a predefined table of price ranges to determine what the box size should be. Price Range Box Size Under 0.25 0.0625 0.25 to 1.00 0.125 1.00 to 5.00 0.25 5.00 to 20.00 0.50 20.00 to 100 1.0 100 to 200 2.0 200 to 500 4.0 500 to 1000 5.0 1000 to 25000 50.0 25000 and up 500.0 Default value is “ATR”, you may use one of these scaling method that suits your trading strategy. If ATR or Percentage is chosen then there is rounding algorithm according to mintick value of the security. For example if mintick value is 0.001 and box size (ATR/Percentage) is 0.00124 then box size becomes 0.001. And also while using dynamic box size (ATR or Percentage), box size changes only when closing price changed. Reversal : It is the number of boxes required to change from a column of Xs to a column of Os or from a column of Os to a column of Xs. Default value is 3 (most used). For example if you choose reversal = 2 then you get the chart similar to Renko chart. Source: Closing price or High-Low prices can be chosen as data source for P&F charting. Chart Style: There are 3 options for chart style: “Candle”, “Area” or “Don’t show”. As Area: As Candle: X/O Column Style: it can show all columns from opening price or only last Xs/Os. Color Theme: different themes exist => Green/Red, Yellow/Blue, White/Yellow, Orange/Blue, Lime/Red, Blue/Red Show Breakouts is the option to show Breakouts This tool detects & shows following Breakouts: Triple Top/Bottom, Triple Top Ascending, Triple Bottom Descending, Simple Buy/Sell (Double Top/Bottom), Simple Buy With Rising Bottom, Simple Sell With Declining Top Catapult bullish/bearish Show Horizontal Count Targets: Finds the congestion or consolidation pattern and if there is breakout then it calculates the Target by using Horizontal Count method (based on the width of congestion pattern). It shows how many column exist on congestion area. There is no guarantee that prices will reach the target. Show Vertical Count Targets: When Triple Top/Bottom Breakouts occured the script calculates the target by using Vertical Count Method (based on the length of the column). There is no guarantee that prices will reach the target. For both methods there is auto target cancellation if price goes below congestion bottom or above congestion top. trend is calculated by EMA of closing price of the P&F Whipsaw protection: Last options are “Show info panel” and Labeling Offset. Script shows current box size, reversal, and recommanded minimum and maximum box size. And also it shows the price level to reverse the column (Xs <-> Os) and the price level to add at least 1 more box to column. This is the option to put these labels 10, 20, 30, 50 or 100 bars away from the last bar. Labeling content and color change according to X/O column. do not hesitate to comment.