Predict — Indicators and Strategies

Ultimate T3 Fibonacci for BTC Scalping. Look at backtest report!Hey Everyone! I created another script to add to my growing library of strategies and indicators that I use for automated crypto trading! This strategy is for BITCOIN on the 30 minute chart since I designed it to be a scalping strategy. I calculated for trading fees, and use a small amount of capital in the backtest report. But feel free to modify the capital and how much per order to see how it changes the results:) It is called the "Ultimate T3 Fibonacci Indicator by NHBprod" that computes and displays two T3-based moving averages derived from price data. The t3_function calculates the Tilson T3 indicator by applying a series of exponential moving averages to a combined price metric and then blending these results with specific coefficients derived from an input factor. The script accepts several user inputs that toggle the use of the T3 filter, select the buy signal method, and set parameters like lengths and volume factors for two variations of the T3 calculation. Two T3 lines, T3 and T32, are computed with different parameters, and their colors change dynamically (green/red for T3 and blue/purple for T32) based on whether the lines are trending upward or downward. Depending on the selected signal method, the script generates buy signals either when T32 crosses over T3 or when the closing price is above T3, and similarly, sell signals are generated on the respective conditions for crossing under or closing below. Finally, the indicator plots the T3 lines on the chart, adds visual buy/sell markers, and sets alert conditions to notify users when the respective trading signals occur. The user has the ability to tune the parameters using TP/SL, date timerames for analyses, and the actual parameters of the T3 function including the buy/sell signal! Lastly, the user has the option of trading this long, short, or both! Let me know your thoughts and check out the backtest report!

Viking Fun Predict Особая благодарность за оригинальную идею Александру Горчакову Индикатор предсказывает вырастет или упадет цена на следующей свече Индикатор отображает красные или зеленые кружки над каждой из свечей Зеленый кружок прогноз роста Красный кружок прогноз падения Индикатор выдает прогноз для шестой свечи на основе пяти свечей Индикатор берет цены максимумов и минимумов пяти свечей и усредняет их, получая 5 значений. На основе полученных 5 значений строится линейная регрессия Если линия линейной регрессии возрастает, то индикатор прогнозирует рост (зеленый кружок) Если линия линейной регрессии возрастает, то индикатор прогнозирует падение (красный кружок) Компания Викинг предоставляет профессиональный сервис, позволяющий реализовать арбитражные стратегии и маркет-мейкинг, осуществляет обучение трейдеров-арбитражеров. --------------------------- Special thanks for the original idea to Alexander Gorchakov The indicator predicts whether the price will rise or fall on the next candle The indicator displays red or green circles above each of the candles Green circle growth forecast Red circle forecast of the fall The indicator gives a forecast for the sixth candle based on five candles The indicator takes the prices of the highs and lows of five candles and averages them, getting 5 values. Based on the obtained 5 values, a linear regression is constructed If the linear regression line increases, the indicator predicts growth (green circle) If the linear regression line increases, the indicator predicts a fall (red circle) Viking provides a professional service that allows you to implement arbitrage strategies and market making, and provides training for arbitrage traders.

YinYang Bar Forecast Overview: YinYang Bar Forecast is a prediction indicator. It predicts the movement for High, Low, Open and Close for up to 13 bars into the future. We created this Indicator as we felt the TradingView community could benefit from a bar forecast as there wasn’t any currently available. Our YinYang Bar Forecast is something we plan on continuously working on to better improve it, but at its current state it is still very useful and decently accurate. It features many calculations to derive what it thinks the future bars will hold. Let’s discuss some of the logic behind it: Each bar has its High, Low, Open and Close calculated individually for highest accuracy. Within these calculations we first check which bar it is we are calculating and base our span back length that we are getting our data from based on the bar index we are generating. This helps us get a Moving Average for this bar index. We take this MA and we apply our Custom Volume Filter calculation on it, which is essentially us dividing the current bars volume over the average volume in the last ‘Filtered Length’ (Setting) length. We take this decimal and multiply it on our MA and smooth it out with a VWMA. We take the new Volume Filtered MA and apply a RSI Filter calculation on it. RSI Filter is where we take the difference between the high and low of this bar and we multiply it with an RSI calculation using our Volume Filtered MA. We take the result of that multiplication and either add or subtract it from the Volume Filtered MA based on if close > open. This makes our RSI Filtered MA. Next, we do an EMA Strength Calculation which is where we check if close > ema(close, ‘EMA Averaged Length’) (Setting). Based on this condition we assign a multiplier that is applied to our RSI Filtered MA. We divide by how many bars we are predicting and add a bit to each predictive bar so that the further we go into the future the stronger the strength is. Next we check RSI and RSI MA levels and apply multiplications based on its RSI levels and if it is greater than or less than the MA. Also it is affected by if the RSI is <= 30 and >= 70. Finally we check the MFI and MFI MA levels and like RSI we apply multiplications based on its MFI levels and if it is greater than or less than the MA. It is also affected by if the MFI is <= 30 and >= 70. Please note the way we calculate this may change in the future, this is just currently what we deemed works best for forecasting the future bars. Also note this script uses MA calculations out of scope for efficiency but there is potential for inconsistencies. Innately it’s main use is the projection it provides. It only draws the bars for realtime bars and not historical ones, so the best way to backtest it is with TradingView’s Replay Tool. Well, enough of the logic behind it, let's get to understanding how to use it: Tutorial: So unfortunately we aren’t able to plot legit bars/candles into the future so we’ve had to do a bit of a work around using lines and fills. As you can see here we have 4 Lines and 3 Zones: Lines: Green: Represents the High Orange: Represents the Open Teal: Represents the Close Red: Represents the Low Zones: High Zone: This zone is from either Open or Close to the High and is ALWAYS filled with Green. Open/Close Zone: This zone is from the Open to the Close and is filled with either Green or Red based on if it's greater than the previous bar (real or forecasted). Low Zone: This zone is from either Open or Close to the Low and is ALWAYS filled with Red. As you can see generally the Forecasted bars are generally within strong pivot locations and are a good estimation of what will likely go on. Please note, the WHOLE structure of the prediction can change based on the current bars movements and the way it affects the calculations. Let's look 1 bar back from the current bar just so we can see what it used to Forecast: As you can see it has changed quite a bit from the previous bar, but if you look close, we drew horizontal lines around where its projecting the next bar to be (our current realtime bar), if we go back to the live chart: Its projections were pretty close for the high and low. Generally, right now at least, it does a much better job at predicting the high and low than it does the open and close, however we will do our best to fine tune that in future updates. Remember, this indicator is not meant to base your trades on, but rather give you a Forecast towards the general direction of the next few bars. Somewhat like weather, the farther the bar (or day for weather), the harder it is to predict. For this reason we recommend you focusing on the first few bars as they are more accurate, but review the further ones as they may help show the trend and the way that pair will move. We will conclude this tutorial here, hopefully this Predictive Indicator can be of some help and use to you. If you have any questions, comments, ideas or concerns please let us know. Settings: Forecast Length: How many bars should we predict into the Future? Max 13 Each Bar Length Multiplier: For each new Forecast bar, how many more bars are averaged? Min 2 VWMA Averaged Length: All Forecast bars are put into a VWMA, what length should we use? EMA Averaged Length: All Forecast bars are put into a EMA, what length should we use? Filtered Length: What length should we use for Filtered Volume and RSI? EMA Strength Length: What length should we use for the EMA Strength HAPPY TRADING!

Magic 8-Ball [QuantNomad]Sometimes get tired and what to create something fun and useless ) Here I developed a magic 8-ball. You can apply it to the chart, and it randomly will show you a prediction unique for your symbol/candle time. Please don't take this prediction seriously; there is 0 rationale behind it. However, I believe it can outperform some traders here on TradginView =) So it will show you one of the following messages: Buy Strong Buy HODL Sell Strong Sell Ask again later Better not tell you now Neutral Cannot predict now Very doubtful

Bitcoin Implied Volatility This simple script collects data from FTX:BVOLUSD to plot BTC’s implied volatility as a standalone indicator instead of a chart. Implied volatility is used to gauge future volatility and often used in options trading.