Selltherip — Indicators and Strategies

[SHORT ONLY] 10 Bar Low Pullback █ STRATEGY DESCRIPTION The "10 Bar Low Pullback" strategy is a contrarian short trading system designed to capture pullbacks after a new 10‐bar low is made. it identifies a potential short opportunity when the current bar’s low breaks below the lowest low of the previous 10 bars, provided that the bar exhibits strong internal momentum as measured by its IBS value. An optional trend filter further refines entries by requiring that the close is below a 200-period EMA. █ WHAT IS INTERNAL BAR STRENGTH (IBS)? Internal Bar Strength (IBS) measures where the closing price falls within the high-low range of a bar. It is calculated as: ibs = (close - low) / (high - low) - Low IBS (≤ 0.2): Indicates the close is near the bar's low, suggesting oversold conditions. - High IBS (≥ 0.8): Indicates the close is near the bar's high, suggesting overbought conditions. █ SIGNAL GENERATION 1. SHORT ENTRY A Short Signal is triggered when: The current bar’s low is below the lowest low of the past X bars (default: 10). The bar’s IBS is greater than the specified threshold (default: 0.85). The signal occurs within the defined trading window (between Start Time and End Time). If the EMA Filter is enabled, the close must be below the 200-period EMA. 2. EXIT CONDITION An exit Signal is generated when the current close falls below the previous bar’s low (close < low ), indicating a potential bearish reversal and prompting the strategy to close its short position. █ ADDITIONAL SETTINGS Lookback Period: Defines the number of bars (default is 10) over which the lowest low is calculated. IBS Threshold: Sets the minimum required IBS value (default is 0.85) to qualify as a pullback. Trading Window: Trades are only executed between the user-defined Start Time and End Time. EMA Filter (Optional): When enabled, short entries are only considered if the current close is below the 200-period EMA, with the EMA period being adjustable (default is 200). █ PERFORMANCE OVERVIEW Designed for shorting opportunities, this strategy aims to capture pullbacks following an aggressive 10-bar low break. It leverages a combination of a lookback low and IBS measurement to identify overextended bullish moves that may revert. The optional EMA filter helps confirm a bearish market environment by ensuring the price remains under the trend line. Suitable for use on various assets, including stocks and ETFs, on daily or similar timeframes. Backtesting and parameter optimization are recommended to tailor the strategy to specific market conditions.

[SHORT ONLY] ATR Sell the Rip Mean Reversion Strategy █ STRATEGY DESCRIPTION The "ATR Sell the Rip Mean Reversion Strategy" is a contrarian system that targets overextended price moves on stocks and ETFs. It calculates an ATR‐based trigger level to identify shorting opportunities. When the current close exceeds this smoothed ATR trigger, and if the close is below a 200-period EMA (if enabled), the strategy initiates a short entry, aiming to profit from an anticipated corrective pullback. █ HOW IS THE ATR SIGNAL BAND CALCULATED? This strategy computes an ATR-based signal trigger as follows: Calculate the ATR The strategy computes the Average True Range (ATR) using a configurable period provided by the user: atrValue = ta.atr(atrPeriod) Determine the Threshold Multiply the ATR by a predefined multiplier and add it to the current close: atrThreshold = close + atrValue * atrMultInput Smooth the Threshold Apply a Simple Moving Average over a specified period to smooth out the threshold, reducing noise: signalTrigger = ta.sma(atrThreshold, smoothPeriodInput) █ SIGNAL GENERATION 1. SHORT ENTRY A Short Signal is triggered when: The current close is above the smoothed ATR signal trigger. The trade occurs within the specified trading window (between Start Time and End Time). If the EMA filter is enabled, the close must also be below the 200-period EMA. 2. EXIT CONDITION An exit Signal is generated when the current close falls below the previous bar’s low (close < low ), indicating a potential bearish reversal and prompting the strategy to close its short position. █ ADDITIONAL SETTINGS ATR Period: The period used to calculate the ATR, allowing for adaptability to different volatility conditions (default is 20). ATR Multiplier: The multiplier applied to the ATR to determine the raw threshold (default is 1.0). Smoothing Period: The period over which the raw ATR threshold is smoothed using an SMA (default is 10). Start Time and End Time: Defines the time window during which trades are allowed. EMA Filter (Optional): When enabled, short entries are only executed if the current close is below the 200-period EMA, confirming a bearish trend. █ PERFORMANCE OVERVIEW This strategy is designed for use on the Daily timeframe, targeting stocks and ETFs by capitalizing on overextended price moves. It utilizes a dynamic, ATR-based trigger to identify when prices have potentially peaked, setting the stage for a mean reversion short entry. The optional EMA filter helps align trades with broader market trends, potentially reducing false signals. Backtesting is recommended to fine-tune the ATR multiplier, smoothing period, and EMA settings to match the volatility and behavior of specific markets.

[SHORT ONLY] Consecutive Close>High[1] Mean Reversion Strategy █ STRATEGY DESCRIPTION The "Consecutive Close > High " Mean Reversion Strategy is a contrarian daily trading system for stocks and ETFs. It identifies potential shorting opportunities by counting consecutive days where the closing price exceeds the previous day's high. When this consecutive day count reaches a predetermined threshold, and if the close is below a 200-period EMA (if enabled), a short entry is triggered, anticipating a corrective pullback. █ HOW ARE THE CONSECUTIVE BULLISH COUNTS CALCULATED? The strategy uses a counter variable called `bullCount` to track how many consecutive bars meet a bullish condition. Here’s a breakdown of the process: Initialize the Counter var int bullCount = 0 Bullish Bar Detection Every time the close exceeds the previous bar's high, increment the counter: if close > high bullCount += 1 Reset on Bearish Bar When there is a clear bearish reversal, the counter is reset to zero: if close < low bullCount := 0 █ SIGNAL GENERATION 1. SHORT ENTRY A Short Signal is triggered when: The count of consecutive bullish closes (where close > high ) reaches or exceeds the defined threshold (default: 3). The signal occurs within the specified trading window (between Start Time and End Time). 2. EXIT CONDITION An exit Signal is generated when the current close falls below the previous bar’s low (close < low ), prompting the strategy to exit the position. █ ADDITIONAL SETTINGS Threshold: The number of consecutive bullish closes required to trigger a short entry (default is 3). Start Time and End Time: The time window during which the strategy is allowed to execute trades. EMA Filter (Optional): When enabled, short entries are only triggered if the current close is below the 200-period EMA. █ PERFORMANCE OVERVIEW This strategy is designed for Stocks and ETFs on the Daily timeframe and targets overextended bullish moves. It aims to capture mean reversion by entering short after a series of consecutive bullish closes. Further optimization is possible with additional filters (e.g., EMA, volume, or volatility). Backtesting should be used to fine-tune the threshold and filter settings for specific market conditions.

Dip & Rip Patterns - The Quant Science 🇺🇸 GENERAL OVERVIEW This indicator detects Dip and Rip patterns by quickly highlighting them on the chart. These patterns have become popular during the pandemic period mainly in the stock, ETF and cryptocurrency markets on which traders use two interesting strategies: Buy The Dip Sell The Rip Before going into the merits of this technical indicator, let's understand what these two patterns mean and what they identify precisely. Rip (Rise In Price) : wants to identify a market condition in which the price rises rapidly, for example from $100 to $110 in a few minutes or hours. Dip (Drop In Price) : wants to identify a market condition in which the price drops rapidly, for example from $100 to $90 in a few minutes or hours. HOW TO USE For a better user experience, we recommend choosing a neutral colour for the candles while analysing with this indicator. You can quickly change the colour in Chart Settings > Symbol > Candles . Depending on the configuration set by the user, the indicator will show Dip (Dip In Price) patterns in red and Rip (Rise In Price) patterns in green. When the pattern forms, a circle will be displayed and a vertical line will be coloured on the chart along with the body of the candle. The user will then be able to quickly and easily track the configured market conditions. In this example, we decided to use a 4H timeframe on the BTC/USDT pair (Binance). Set in the user interface: Period: 20 Dip (%): -25 Rip (%): 20 Price falls by 25% or more in 80 hours (Dip Pattern). Price rise by 25% or more in 80 hours (Rip Pattern). The user can easily configure the parameters via the user interface in the Inputs section (A) and change the indicator design in the Properties section (B). 🇮🇹 PANORAMICA GENERALE Questo indicatore rileva i Dip e Rip patterns evidenziandoli velocemente sul grafico. Questi patterns sono diventati famosi durante il periodo pandemico principalmente nel mercato delle azioni, ETF e Criptovalute su cui i trader utilizzano due interessanti strategie: Buy The Dip Sell The Rip Prima di entrare nel merito di questo indicatore tecnico, comprendiamo il significato di questi due pattern e cosa identificano precisamente. Rip (Rise In Price) : vuole identificare una condizione di mercato in cui il prezzo sale rapidamente, per esempio passando da 100$ a 110$ in pochi minuti o poche ore. Dip (Drop In Price) : vuole identificare una condizione di mercato in cui il prezzo cala rapidamente, per esempio passando da 100$ a 90$ in pochi minuti o poche ore. UTILIZZO Per una migliore esperienza utente consigliamo di scegliere un colore neutro per le candele mentre si analizza con questo indicatore. Puoi cambiare velocemente il colore in Chart Settings > Symbol > Candles . In base alla configurazione impostata dall'utente l'indicatore mostrerà in rosso i pattern Dip (Dip In Price) e in verde i pattern Rip (Rise In Price). Quando il pattern si forma verrà visualizzato un cerchio e una linea verticale sul grafico che sarà colorata insieme al corpo della candela. L'utente quindi potrà tracciare facilmente e velocemente le condizioni di mercato configurate. In questo esempio abbiamo deciso di utilizzare un timeframe 4H con l'obbiettivo di ricercare i patterns sul pair BTC/USDT (Binance). Impostiamo nell'interfaccia utente: Period: 20 Dip (%): -25 Rip (%): 20 Il prezzo diminuisce del 25% o più in 80 ore (Dip Pattern). Il prezzo aumenta del 25% o più in 80 ore (Rip Pattern). L' utente può configurare facilmente i parametri attraverso l'interfaccia utente nella sezione Inputs (A) e modificare il design dell'indicatore nella sezione Properties (B).