Stageanalysis — Indicators and Strategies

Minervini Stage 2 Analysis Handbook for Minervini Stage 2 Analysis Indicator Introduction This handbook provides detailed instructions and guidelines for using the Minervini Stage 2 Analysis Indicator based on Mark Minervini's swing trading methodology. This indicator is designed for traders focusing on US stocks, aiming to capture gains in medium to short-term uptrends (swing trading). Understanding Stage 2 Stage 2 represents a bullish uptrend in a stock's price. Mark Minervini emphasizes entering long positions during this phase. The stage is identified using four key criteria related to moving averages (MAs). Indicator Criteria Stock Price Above MA 150 and 200: Indicates an overall uptrend. MA 150 Above MA 200: Signals a stronger medium-term trend compared to the long-term trend. MA 200 Trending Up for At Least 1 Month (22 Days): Confirms a stable uptrend. MA 50 Above Both MA 150 and 200: Shows short-term strength and momentum. Using the Indicator Entering Trades: Consider long positions when all four criteria are met. This signifies that the stock is in a Stage 2 uptrend. Monitoring Trades: Regularly check if the stock continues to meet these criteria. The indicator provides a clear visual and textual representation for ease of monitoring. Alarm Signals and Exit Strategy One Criterion Not Met: This serves as an alarm signal. Increased vigilance is required, and traders should prepare for a potential exit. Two Criteria Not Met: Strong indication to close the trade. This suggests the stock may be transitioning out of Stage 2, increasing the risk of holding the position. Risk Management Stop-Loss Orders: Consider setting a trailing stop-loss to protect profits and minimize losses. Position Sizing: Adjust position sizes according to your risk tolerance and portfolio strategy. Volume and Relative Strength Analysis Volume Analysis: Look for increased trading volume as confirmation when the stock price moves above key MAs. Relative Strength (RS) Rating: Compare the stock's performance to the broader market to gauge its strength. Limitations and Considerations Market Conditions: The indicator's effectiveness may vary with market conditions. It is more reliable in a bullish market environment. Supplementary Analysis: Combine this indicator with other analysis methods (fundamental, technical) for a holistic approach. Continuous Learning: Stay updated with market trends and adjust your strategy accordingly. Conclusion The Minervini Stage 2 Analysis Indicator is a powerful tool for identifying potential long positions in uptrending stocks. Its reliance on specific criteria aligns with Mark Minervini's proven swing trading strategy. However, always exercise due diligence and risk management in your trading decisions.

The Flash-Strategy with Minervini Stage Analysis Qualifier The Flash-Strategy (Momentum-RSI, EMA-crossover, ATR) with Minervini Stage Analysis Qualifier Introduction Welcome to a comprehensive guide on a cutting-edge trading strategy I've developed, designed for the modern trader seeking an edge in today's dynamic markets. This strategy, which I've honed through my years of experience in the trading arena, stands out for its unique blend of technical analysis and market intuition, tailored specifically for use on the TradingView platform. As a trader with a deep passion for the financial markets, my journey began several years ago, driven by a relentless pursuit of a trading methodology that is both effective and adaptable. My background in trading spans various market conditions and asset classes, providing me with a rich tapestry of experiences from which to draw. This strategy is the culmination of that journey, embodying the lessons learned and insights gained along the way. The cornerstone of this strategy lies in its ability to generate precise long signals in a Stage 2 uptrend and equally accurate short signals in a Stage 4 downtrend. This approach is rooted in the principles of trend following and momentum trading, harnessing the power of key indicators such as the Momentum-RSI, EMA Crossover, and Average True Range (ATR). What sets this strategy apart is its meticulous design, which allows it to adapt to the ever-changing market conditions, providing traders with a robust tool for navigating both bullish and bearish scenarios. This strategy was born out of a desire to create a trading system that is not only highly effective in identifying potential trade setups but also straightforward enough to be implemented by traders of varying skill levels. It's a reflection of my belief that successful trading hinges on clarity, precision, and disciplined execution. Whether you are a seasoned trader or just beginning your journey, this guide aims to provide you with a comprehensive understanding of how to harness the full potential of this strategy in your trading endeavors. In the following sections, we will delve deeper into the mechanics of the strategy, its implementation, and how to make the most out of its features. Join me as we explore the nuances of a strategy that is designed to elevate your trading to the next level. Stage-Specific Signal Generation A distinctive feature of this trading strategy is its focus on generating long signals exclusively during Stage 2 uptrends and short signals during Stage 4 downtrends. This approach is based on the widely recognized market cycle theory, which divides the market into four stages: Stage 1 (accumulation), Stage 2 (uptrend), Stage 3 (distribution), and Stage 4 (downtrend). By aligning the signal generation with these specific stages, the strategy aims to capitalize on the most dynamic and clear-cut market movements, thereby enhancing the potential for profitable trades. 1. Long Signals in Stage 2 Uptrends • Characteristics of Stage 2: Stage 2 is characterized by a strong uptrend, where prices are consistently rising. This stage typically follows a period of accumulation (Stage 1) and is marked by increased investor interest and bullish sentiment in the market. • Criteria for Long Signal Generation: Long signals are generated during this stage when the technical indicators align with the characteristics of a Stage 2 uptrend. • Rationale for Stage-Specific Signals: By focusing on Stage 2 for long trades, the strategy seeks to enter positions during the phase of strong upward momentum, thus riding the wave of rising prices and investor optimism. This stage-specific approach minimizes exposure to less predictable market phases, like the consolidation in Stage 1 or the indecision in Stage 3. 2. Short Signals in Stage 4 Downtrends • Characteristics of Stage 4: Stage 4 is identified by a pronounced downtrend, with declining prices indicating prevailing bearish sentiment. This stage typically follows the distribution phase (Stage 3) and is characterized by increasing selling pressure. • Criteria for Short Signal Generation: Short signals are generated in this stage when the indicators reflect a strong bearish trend. • Rationale for Stage-Specific Signals: Targeting Stage 4 for shorting capitalizes on the market's downward momentum. This tactic aligns with the natural market cycle, allowing traders to exploit the downward price movements effectively. By doing so, the strategy avoids the potential pitfalls of shorting during the early or late stages of the market cycle, where trends are less defined and more susceptible to reversals. In conclusion, the strategy’s emphasis on stage-specific signal generation is a testament to its sophisticated understanding of market dynamics. By tailoring the long and short signals to Stages 2 and 4, respectively, it leverages the most compelling phases of the market cycle, offering traders a clear and structured approach to aligning their trades with dominant market trends. Strategy Overview At the heart of this trading strategy is a philosophy centered around capturing market momentum and trend efficiency. The core objective is to identify and capitalize on clear uptrends and downtrends, thereby allowing traders to position themselves in sync with the market's prevailing direction. This approach is grounded in the belief that aligning trades with these dominant market forces can lead to more consistent and profitable outcomes. The strategy is built on three foundational components, each playing a critical role in the decision-making process: 1. Momentum-RSI (Relative Strength Index): The Momentum-RSI is a pivotal element of this strategy. It's an enhanced version of the traditional RSI, fine-tuned to better capture the strength and velocity of market trends. By measuring the speed and change of price movements, the Momentum-RSI provides invaluable insights into whether a market is potentially overbought or oversold, suggesting possible entry and exit points. This indicator is especially effective in filtering out noise and focusing on substantial market moves. 2. EMA (Exponential Moving Average) Crossover: The EMA Crossover is a crucial component for trend identification. This strategy employs two EMAs with different timeframes to determine the market trend. When the shorter-term EMA crosses above the longer-term EMA, it signals an emerging uptrend, suggesting a potential long entry. Conversely, a crossover below indicates a possible downtrend, hinting at a short entry opportunity. This simple yet powerful tool is key in confirming trend directions and timing market entries. 3. ATR (Average True Range): The ATR is instrumental in assessing market volatility. This indicator helps in understanding the average range of price movements over a given period, thus providing a sense of how much a market might move on a typical day. In this strategy, the ATR is used to adjust stop-loss levels and to gauge the potential risk and reward of trades. It allows for more informed decisions by aligning trade management techniques with the current volatility conditions. The synergy of these three components – the Momentum-RSI, EMA Crossover, and ATR – creates a robust framework for this trading strategy. By combining momentum analysis, trend identification, and volatility assessment, the strategy offers a comprehensive approach to navigating the markets. Whether it's capturing a strong trend in its early stages or identifying a potential reversal, this strategy aims to provide traders with the tools and insights needed to make well-informed, strategically sound trading decisions. Detailed Component Analysis The efficacy of this trading strategy hinges on the synergistic functioning of its three key components: the Momentum-RSI, EMA Crossover, and Average True Range (ATR). Each component brings a unique perspective to the strategy, contributing to a well-rounded approach to market analysis. 1. Momentum-RSI (Relative Strength Index) • Definition and Function: The Momentum-RSI is a modified version of the classic Relative Strength Index. While the traditional RSI measures the velocity and magnitude of directional price movements, the Momentum-RSI amplifies aspects that reflect trend strength and momentum. • Significance in Identifying Trend Strength: This indicator excels in identifying the strength behind a market's move. A high Momentum-RSI value typically indicates strong bullish momentum, suggesting the potential continuation of an uptrend. Conversely, a low Momentum-RSI value signals strong bearish momentum, possibly indicative of an ongoing downtrend. • Application in Strategy: In this strategy, the Momentum-RSI is used to gauge the underlying strength of market trends. It helps in filtering out minor fluctuations and focusing on significant movements, providing a clearer picture of the market's true momentum. 2. EMA (Exponential Moving Average) Crossover • Definition and Function: The EMA Crossover component utilizes two exponential moving averages of different timeframes. Unlike simple moving averages, EMAs give more weight to recent prices, making them more responsive to new information. • Contribution to Market Direction: The interaction between the short-term and long-term EMAs is key to determining market direction. A crossover of the shorter EMA above the longer EMA is an indicator of an emerging uptrend, while a crossover below signals a developing downtrend. • Application in Strategy: The EMA Crossover serves as a trend confirmation tool. It provides a clear, visual representation of the market's direction, aiding in the decision-making process for entering long or short positions. This component ensures that trades are aligned with the prevailing market trend, a crucial factor for the success of the strategy. 3. ATR (Average True Range) • Definition and Function: The ATR is an indicator that measures market volatility by calculating the average range between the high and low prices over a specified period. • Role in Assessing Market Volatility: The ATR provides insights into the typical market movement within a given timeframe, offering a measure of the market's volatility. Higher ATR values indicate increased volatility, while lower values suggest a calmer market environment. • Application in Strategy: Within this strategy, the ATR is instrumental in tailoring risk management techniques, particularly in setting stop-loss levels. By accounting for the market's volatility, the ATR ensures that stop-loss orders are placed at levels that are neither too tight (risking premature exits) nor too loose (exposing to excessive risk). In summary, the combination of Momentum-RSI, EMA Crossover, and ATR in this trading strategy provides a comprehensive toolkit for market analysis. The Momentum-RSI identifies the strength of market trends, the EMA Crossover confirms the market direction, and the ATR guides in risk management by assessing volatility. Together, these components form the backbone of a strategy designed to navigate the complexities of the financial markets effectively. 1. Signal Generation Process • Combining Indicators: The strategy operates by synthesizing signals from the Momentum-RSI, EMA Crossover, and ATR indicators. Each indicator serves a specific purpose: the Momentum-RSI gauges trend momentum, the EMA Crossover identifies the trend direction, and the ATR assesses the market’s volatility. • Criteria for Signal Validation: For a signal to be considered valid, it must meet specific criteria set by each of the three indicators. This multi-layered approach ensures that signals are not only based on one aspect of market behavior but are a result of a comprehensive analysis. 2. Conditions for Long Positions • Uptrend Confirmation: A long position signal is generated when the shorter-term EMA crosses above the longer-term EMA, indicating an uptrend. • Momentum-RSI Alignment: Alongside the EMA crossover, the Momentum-RSI should indicate strong bullish momentum. This is typically represented by the Momentum-RSI being at a high level, confirming the strength of the uptrend. • ATR Consideration: The ATR is used to fine-tune the entry point and set an appropriate stop-loss level. In a low volatility scenario, as indicated by the ATR, the stop-loss can be set tighter, closer to the entry point. 3. Conditions for Short Positions • Downtrend Confirmation: Conversely, a short position signal is indicated when the shorter-term EMA crosses below the longer-term EMA, signaling a downtrend. • Momentum-RSI Confirmation: The Momentum-RSI should reflect strong bearish momentum, usually seen when the Momentum-RSI is at a low level. This confirms the bearish strength of the market. • ATR Application: The ATR again plays a role in determining the stop-loss level for the short position. Higher volatility, as indicated by a higher ATR, would warrant a wider stop-loss to accommodate larger market swings. By adhering to these mechanics, the strategy aims to ensure that each trade is entered with a high probability of success, aligning with the market’s current momentum and trend. The integration of these indicators allows for a holistic market analysis, providing traders with clear and actionable signals for both entering and exiting trades. Customizable Parameters in the Strategy Flexibility and adaptability are key features of this trading strategy, achieved through a range of customizable parameters. These parameters allow traders to tailor the strategy to their individual trading style, risk tolerance, and specific market conditions. By adjusting these parameters, users can fine-tune the strategy to optimize its performance and align it with their unique trading objectives. Below are the primary parameters that can be customized within the strategy: 1. Momentum-RSI Settings • Period: The lookback period for the Momentum-RSI can be adjusted. A shorter period makes the indicator more sensitive to recent price changes, while a longer period smoothens the RSI line, offering a broader view of the momentum. • Overbought/Oversold Thresholds: Users can set their own overbought and oversold levels, which can help in identifying extreme market conditions more precisely according to their trading approach. 2. EMA Crossover Settings • Timeframes for EMAs: The strategy uses two EMAs with different timeframes. Traders can modify these timeframes, choosing shorter periods for a more responsive approach or longer periods for a more conservative one. • Source Data: The choice of price data (close, open, high, low) used in calculating the EMAs can be varied depending on the trader’s preference. 3. ATR Settings • Lookback Period: Adjusting the lookback period for the ATR impacts how the indicator measures volatility. A longer period may provide a more stable but less responsive measure, while a shorter period offers quicker but potentially more erratic readings. • Multiplier for Stop-Loss Calculation: This parameter allows traders to set how aggressively or conservatively they want their stop-loss to be in relation to the ATR value. Here are the standard settings:

sᴛᴀɢᴇ ᴀɴᴀʏʟsɪs Stage analysis is a technical analysis approach that involves categorizing a stock's price movements into different stages to help traders and investors make more informed decisions. It was popularized by Stan Weinstein in his book, "Secrets for Profiting in Bull and Bear Markets." The stages are used to identify the overall trend and to time entries and exits in the market. Here's an explanation of the typical stages in stage analysis: 1. **Stage 1: Accumulation Phase** - In this stage, the stock is in a downtrend or has been trading sideways for an extended period. - Volume is relatively low, indicating that institutions and smart money may be quietly accumulating shares. - The stock may test and hold support levels, showing signs of stability. - The goal for traders in this stage is to identify the potential for a trend reversal. 2. **Stage 2: Markup (Bull Market) Phase** - This is the stage where the stock starts a significant uptrend. - Volume increases as institutional and retail investors become more interested in the stock. - Technical indicators like moving averages and trendlines confirm the uptrend. - Traders and investors look for buying opportunities during pullbacks or consolidations within the uptrend. 3. **Stage 3: Distribution Phase** - In this stage, the stock's price begins to show signs of weakness. - Volume might decrease as institutions and smart money start selling their positions. - The stock may start forming a trading range or exhibit bearish chart patterns. - Traders should consider taking profits or reducing exposure to the stock as it may enter a downtrend. 4. **Stage 4: Markdown (Bear Market) Phase** - This is the stage where the stock enters a significant downtrend. - Volume may remain elevated as selling pressure dominates. - Technical indicators confirm the downtrend. - Traders and investors should avoid buying the stock and may consider short-selling or staying on the sidelines. Stage analysis helps traders and investors make decisions based on the current stage of a stock's price movement. The goal is to enter during the accumulation phase or early in the markup phase and exit during the distribution phase or before the markdown phase to maximize profits and minimize losses. ============================================================= try to just show the Stage number in a table, but always double check for yourself

Mansfield Relative Strength (Original Version) by stageanalysis The Mansfield Relative Strength ( Mansfield RS ) is one of the core components of the Stan Weinstein's Stage Analysis method as discussed in his classic book Stan Weinstein's Secrets for Profiting in Bull and Bear Markets . The Mansfield RS measures the relative performance of the stock compared to an index such as the S&P 500, or to another stock etc. However, this should not to be confused with the popular RSI (Relative Strength Index developed J. Welles Wilder), which is a momentum oscillator that measures the speed and change of price movements on a single stock. The Mansfield RS indicator consists of the Relative Strength comparison line versus the S&P 500 (default universal setting, but can be edited), and the "Zero Line" – which is the 52 week MA of the Relative Strength line, that's been flattened to create the oscillator style. How to use the Indicator: Outperforming – Above the Zero Line When the Relative Strength line crosses above the Zero Line (it's flattened 52 week RS MA), it is outperforming the index or stock that it's comparing against, and so it is showing stronger relative strength. Underperforming – Below the Zero Line When the Relative Strength line crosses below the Zero Line (it's flattened 52 week RS MA), it is underperforming the index or stock that it's comparing against, and so it is showing weaker relative strength. Settings: When you first add the indicator is has a coloured background, with a green tint for a postive RS score, and a red tint for a negative RS score. However, this can be turned off, or edited in the indicator settings, in the Style tab. So you can change the colors or remove it and just have the RS line and zero line showing. Both of which can also be edited in the settings. Change the symbol that it compares against. The default is the S&P 500. But for crypto you might want to use Bitcoin for example. Or you might want to compare against competing stocks in the same peer group, or against the industry group or sector. The choice is yours. But the S&P 500 is a universal measure for the Mansfield RS. So I would recommend leaving it on that unless you have a particular reason to change it as mentioned. MA Length is also an editable setting. This creates the Zero Line. So it will affect the values of the Mansfield RS if you change it. 52 is the default setting, and is set as such for the weekly chart. So I'd recommend not editing it on the weekly chart, but for other timeframes, different settings can be used.

world stage index ver02 This is an indicator that expresses the ratio of "stage1" and "stage4" of world index. 40 symbols are as follows ("TVC:SHCOMP" is revised to "SSE:000001") (JAPAN, US, EUROPE, and CANADA) OSE:NK2251!, DJ:DJI , NASDAQ:IXIC, SP:SPX , XETR:DAX, TVC:CAC40 , TVC:UKX, TSX:TSX (ASIA) SSE:000001, SZSE:399001, TVC:HSI, TWSE:TAIEX, BSE:SENSEX , OANDA:SG30SGD, INDEX:KSI, SET:SET (EUROPE) INDEX:SX5E, INDEX:FTSEMIB, SIX:SMI , BME:IBC, EURONEXT:BEL20, TVC:AEX, OMXCOP:OMXC25, XETR:0Q5X (Pacific Ocean) ASX:XJO, TVC:NZ50G, IDX:COMPOSITE, FTSEMYX:FBMKLCI, BMFBOVESPA:IBOV, BMV:ME , BVL:SPBLPGPT, BYMA:IMV (Eastern Europe & Middle East) MOEX:IMOEX, GPW:WIG20, OMXHEX:OMXH25, OMXSTO:OMXS30, DFM:DFMGI, TADAWUL:TASI, OSE:GNRI, EGX:EGX30 The criteria are as follows: EMA5≧EMA20≧EMA40 : Stage1 EMA5≦EMA20≦EMA40 : Stage4 A.The sum of Stage1 was multiplied by 2.5 and drawn on a scale of 0 to 100, with yellow area B.The Sum of Stage4 was multiplied by 2.5 and drawn on a scale of 0 to 100, with blue area. C. The ratio of A/B was multiplied by 2.5 and drawn on a scale of 0 to 100, with red lines. This idea is from Kojirou Kousi. 40 symbols of this script are partially different from Kojiro kousi's idea. But he said the difference isn't matter. tradingview社の上海総合指数の銘柄コード変更に合わせて、"TVC:SHCOMP"　を "SSE:000001"に改訂しました。「小次郎講師指数」に着想を得た、世界40カ国の株価指数stage状態です。参考文献は、小次郎講師著書「世界一わかりやすい投資の勝ち方」です。小次郎講師とは一部異なるシンボルを採用していますが、多少の違いは余り大した問題では無いと御本人から教わった事があります。先進国に関してはおそらくほとんど同じだと思います。 stage1の合計の%を黄色、stage4の合計の%を青色、stage1の合計/stage4の合計の%を赤で表示しています。雰囲気で分かればいいので、正確な数字までは表示しませんでした。個人的には現状分析以外にも、プラクティス時に世界情勢を把握するのに重宝しています。

Market Pulse BINANCE:BTCUSDT This is the "Market Pulse" indicator from TOS Indicators. The scope of this indicator is to identify which one of the four market stages we're in █ WHAT ARE THE 4 STAGES? ACCELERATION (or uptrend) DECELERATION (or downtrend) ACCUMULATION (occurs after the market has presumably found a bottom and buyers are coming in) DISTRIBUTION (occurs after the market has presumably found a top and sellers are coming in) █ WHAT ARE THE TOOLS THAT IT USES TO IDENTIFY THEM? 3 VWMA (Volume Weighted Moving Average) 1 VMA (Variable Moving Average) VWMA = is a moving average which takes volume into account, and gives closes with higher volume an higher weight vwma(src, len) => ta.sma(src * volume, len) / ta.sma(volume, len) VMA = is a moving average which automatically adjusts the smoothing constant using Market Volatility vma(src, len) => vi = ta.cmo(src, len) / 100 alpha = 2 / (len + 1) * math.abs(vi) vma = 0.0 vma := alpha * src + nz(vma ) * (1 - alpha) █ HOW CAN I INTERPRET THE INDICATOR? 1) On the top right you can see a box which tells you the Market Stage of the chart you are currently using: If VWMA8 > VWMA21 > VWMA34 it signals ACCELERATION, color coded in green If VWMA8 < VWMA21 < VWMA34 it signals DECELERATION, color coded in red If neither of the previous two conditions are met it signals ACCUMULATION (yellow) if price closes above the VMA and DISTRIBUTION (orange) if price closes below the VMA 2) Next you have the actual VMA which is the line plotted on the chart and color coded in green, red or gray accordingly to the Market Stage with a filter applied: for a bullish signal (green label) the market needs to be in ACCELERATION and price must be above the VMA for a bearish signal (red label) the market needs to be in DECELERATION and price must be below the VMA This characteristic makes it sometimes slower at giving direction indications, but also makes it more suitable to be considered as actual signals for buying and selling ACCUMULATION and DISTRIBUTION are both rapresented with color gray, if you want you can consider: the line going from green to gray as ACCUMULATION, your bias is bullish until the line turns red the line going from red to gray as DISTRIBUTION, your bias is bearish until the line turns green 3) Then you can choose to plot the 3 VWMA to indentify pullbacks and entries for your trades 4) Finally you have the Market Screener, which you can choose to plot and gives a fast look to the markets you are interested on It basically gives you the Market Stage for every Symbol you choose using the timeframes you input The maximum number of Symbols you can set is 20, and for all of them you have 2 different timeframes you can choose to analyse. By default the Symbols are set to the top 20 Cryptocurrency by Market Cap, and the timeframes to 4h and D There is an option which is on by default and color codes ACCUMULATION and DISTRIBUTION the same as the box on the top right, you can turn it off to make them gray As I've written in the tooltip inside the indicator you should only use the screener to analyse timeframes which are equal or higher than the one you are currently on your chart. If you don't plan to use the screener you can delete every symbol from the input boxes to make the indicator update faster when changing timeframe or market. Be aware that the screener is on BETA and may give repainting signals!

world stage index This is an indicator that expresses the ratio of "stage1" and "stage4" of world index. 40 symbols are as follows (JAPAN, US, EUROPE, and CANADA) OSE:NK2251!, DJ:DJI, NASDAQ:IXIC, SP:SPX, XETR:DAX, TVC:CAC40, TVC:UKX, TSX:TSX (ASIA) TVC:SHCOMP, SZSE:399001, TVC:HSI, TWSE:TAIEX, BSE:SENSEX, OANDA:SG30SGD, INDEX:KSI, SET:SET (EUROPE) INDEX:SX5E, INDEX:FTSEMIB, SIX:SMI, BME:IBC, EURONEXT:BEL20, TVC:AEX, OMXCOP:OMXC25, XETR:0Q5X (Pacific Ocean) ASX:XJO, TVC:NZ50G, IDX:COMPOSITE, FTSEMYX:FBMKLCI, BMFBOVESPA:IBOV, BMV:ME, BVL:SPBLPGPT, BYMA:IMV (Eastern Europe & Middle East) MOEX:IMOEX, GPW:WIG20, OMXHEX:OMXH25, OMXSTO:OMXS30, DFM:DFMGI, TADAWUL:TASI, OSE:GNRI, EGX:EGX30 The criteria are as follows: EMA5≧EMA20≧EMA40 : Stage1 EMA5≦EMA20≦EMA40 : Stage4 A.The sum of Stage1 was multiplied by 2.5 and drawn on a scale of 0 to 100, with yellow area B.The Sum of Stage4 was multiplied by 2.5 and drawn on a scale of 0 to 100, with blue area. C. The ratio of A/B was multiplied by 2.5 and drawn on a scale of 0 to 100, with red lines. This idea is from Kojirou Kousi. 40 symbols of this script are partially different from Kojiro kousi's idea. But he said the difference isn't matter. 「小次郎講師指数」に着想を得た、世界40カ国の株価指数stage状態です。参考文献は、小次郎講師著書「世界一わかりやすい投資の勝ち方」です。小次郎講師とは一部異なるシンボルを採用していますが、多少の違いは余り大した問題では無いと御本人から教わった事があります。先進国に関してはおそらくほとんど同じだと思います。 stage1の合計の%を黄色、stage4の合計の%を青色、stage1の合計/stage4の合計の%を赤で表示しています。雰囲気で分かればいいので、正確な数字までは表示しませんでした。個人的には現状分析以外にも、プラクティス時に世界情勢を把握するのに重宝しています。