Stochasticcrossover — Indicators and Strategies

Stochastic w/ Crossovers and Deadspace Filter This is my extremely useful modification of the classic Stochastic indicator. It includes clear signals of crossovers and crossunders of the K/D lines. Additionally, I added a "deadspace" filter to remove plotting of signals in the middle of the range, which tend to be misleading. This can be incredibly useful to find entries and trends, especially when using 2 instances of this indicator at different lengths (such as one of 14,1,3 and another of 28,3,6). The deadspace filter works based on the middle line, so a value of 20 will not plot any crossovers between 30-70.

Stochastic Fusion Elite [trade_lexx]📈 Stochastic Fusion Elite is your reliable trading assistant! 📊 What is Stochastic Fusion Elite ? Stochastic Fusion Elite is a trading indicator based on a stochastic oscillator. It analyzes the rate of price change and generates buy or sell signals based on various technical analysis methods. 💡 The main components of the indicator 📊 Stochastic oscillator (K and D) Stochastic shows the position of the current price relative to the price range for a certain period. Values above 80 indicate overbought (an early sale is possible), and values below 20 indicate oversold (an early purchase is possible). 📈 Moving Averages (MA) The indicator uses 10 different types of moving averages to smooth stochastic lines.: - SMA: Simple moving average - EMA: Exponential moving average - WMA: Weighted moving average - HMA: Moving Average Scale - KAMA: Kaufman Adaptive Moving Average - VWMA: Volume-weighted moving average - ALMA: Arnaud Legoux Moving Average - TEMA: Triple exponential moving average - ZLEMA: zero delay exponential moving average - DEMA: Double exponential moving average The choice of the type of moving average affects the speed of the indicator's response to market changes. 🎯 Bollinger Bands (BB) Bands around the moving average that widen and narrow depending on volatility. They help determine when the stochastic is out of the normal range. 🔄 Divergences Divergences show discrepancies between price and stochastic: - Bullish divergence: price is falling and stochastic is rising — an upward reversal is possible - Bearish divergence: the price is rising, and stochastic is falling — a downward reversal is possible 🔍 Indicator signals 1️⃣ KD signals (K and D stochastic lines) - Buy signal: - What happens: the %K line crosses the %D line from bottom to top - What does it look like: a green triangle with the label "KD" under the chart and the label "Buy" below the bar - What does this mean: the price is gaining an upward momentum, growth is possible - Sell signal: - What happens: the %K line crosses the %D line from top to bottom - What it looks like: a red triangle with the label "KD" above the chart and the label "Sell" above the bar - What does this mean: the price is losing its upward momentum, possibly falling 2️⃣ Moving Average Signals (MA) - Buy Signal: - What happens: stochastic crosses the moving average from bottom to top - What it looks like: a green triangle with the label "MA" under the chart and the label "Buy" below the bar - What does this mean: stochastic is starting to accelerate upward, price growth is possible - Sell signal: - What happens: stochastic crosses the moving average from top to bottom - What it looks like: a red triangle with the label "MA" above the chart and the label "Sell" above the bar - What does this mean: stochastic is starting to accelerate downwards, a price drop is possible 3️⃣ Bollinger Band Signals (BB) - Buy signal: - What happens: stochastic crosses the lower Bollinger band from bottom to top - What it looks like: a green triangle with the label "BB" under the chart and the label "Buy" below the bar - What does this mean: stochastic was too low and is now starting to recover - Sell signal: - What happens: Stochastic crosses the upper Bollinger band from top to bottom - What it looks like: a red triangle with a "BB" label above the chart and a "Sell" label above the bar - What does this mean: stochastic was too high and is now starting to decline 4️⃣ Divergence Signals (Div) - Buy Signal (Bullish Divergence): - What's happening: the price is falling, and stochastic is forming higher lows - What it looks like: a green triangle with a "Div" label under the chart and a "Buy" label below the bar - What does this mean: despite the falling price, the momentum is already changing in an upward direction - Sell signal (bearish divergence): - What's going on: the price is rising, and stochastic is forming lower highs - What it looks like: a red triangle with a "Div" label above the chart and a "Sell" label above the bar - What does this mean: despite the price increase, the momentum is already weakening 🛠️ Filters to filter out false signals 1️⃣ Minimum distance between the signals - What it does: sets the minimum number of candles between signals - Why it is needed: prevents signals from being too frequent during strong market fluctuations - How to set it up: Set the number from 0 and above (default: 5) 2️⃣ "Waiting for the opposite signal" mode - What it does: waits for a signal in the opposite direction before generating a new signal - Why you need it: it helps you not to miss important trend reversals - How to set up: just turn the function on or off 3️⃣ Filter by stochastic levels - What it does: generates signals only when the stochastic is in the specified ranges - Why it is needed: it helps to catch the moments when the market is oversold or overbought - How to set up: - For buy signals: set a range for oversold (for example, 1-20) - For sell signals: set a range for overbought (for example, 80-100) 4️⃣ MFI filter - What it does: additionally checks the values of the cash flow index (MFI) - Why it is needed: confirms stochastic signals with cash flow data - How to set it up: - For buy signals: set the range for oversold MFI (for example, 1-25) - For sell signals: set the range for overbought MFI (for example, 75-100) 5️⃣ The RSI filter - What it does: additionally checks the RSI values to confirm the signals - Why it is needed: adds additional confirmation from another popular indicator - How to set up: - For buy signals: set the range for oversold MFI (for example, 1-30) - For sell signals: set the range for overbought MFI (for example, 70-100) 🔄 Signal combination modes 1️⃣ Normal mode - How it works: all signals (KD, MA, BB, Div) work independently of each other - When to use it: for general market analysis or when learning how to work with the indicator 2️⃣ "AND" Mode ("AND Mode") - How it works: the alarm appears only when several conditions are triggered simultaneously - Combination options: - KD+MA: signals from the KD and moving average lines - KD+BB: signals from KD lines and Bollinger bands - KD+Div: signals from the KD and divergence lines - KD+MA+BB: three signals simultaneously - KD+MA+Div: three signals at the same time - KD+BB+Div: three signals at the same time - KD+MA+BB+Div: all four signals at the same time - When to use: for more reliable but rare signals 🔌 Connecting to trading strategies The indicator can be connected to your trading strategies using 6 different channels.: 1. Connector KD signals: connects only the signals from the intersection of lines K and D 2. Connector MA signals: connects only signals from moving averages 3. Connector BB signal: connects only the signals from the Bollinger bands 4. Connector divergence signals: connects only divergence signals 5. Combined Connector: connects any signals 6. Connector for "And" mode: connects only combined signals 🔔 Setting up alerts The indicator can send alerts when alarms appear.: - Alerts for KD: when the %K line crosses the %D line - Alerts for MA: when stochastic crosses the moving average - Alerts for BB: when stochastic crosses the Bollinger bands - Divergence alerts: when a divergence is detected - Combined alerts: for all types of alarms - Alerts for "And" mode: for combined signals 🎭 What does the indicator look like on the chart ? - Main lines K and D: blue and orange lines - Overbought/oversold levels: horizontal lines at levels 20 and 80 - Middle line: dotted line at level 50 - Stochastic Moving Average: yellow line - Bollinger bands: green lines around the moving average - Signals: green and red triangles with corresponding labels 📚 How to start using Stochastic Fusion Elite 1️⃣ Initial setup - Add an indicator to your chart - Select the types of signals you want to use (KD, MA, BB, Div) - Adjust the period and smoothing for the K and D lines 2️⃣ Filter settings - Set the distance between the signals to get rid of unnecessary noise - Adjust stochastic, MFI and RSI levels depending on the volatility of your asset - If you need more reliable signals, turn on the "Waiting for the opposite signal" mode. 3️⃣ Operation mode selection - First, use the standard mode to see all possible signals. - When you get comfortable, try the "And" mode for rarer signals. 4️⃣ Setting up Alerts - Select the types of signals you want to be notified about - Set up alerts for these types of signals 5️⃣ Verification and adaptation - Check the operation of the indicator on historical data - Adjust the parameters for a specific asset - Adapt the settings to your trading style 🌟 Usage examples For trend trading - Use the KD and MA signals in the direction of the main trend - Set the distance between the signals - Set stricter levels for filters For trading in a sideways range - Use BB signals to detect bounces from the range boundaries - Use a stochastic level filter to confirm overbought/oversold conditions - Adjust the Bollinger bands according to the width of the range To determine the pivot points - Pay attention to the divergence signals - Set the distance between the signals - Check the MFI and RSI filters for additional confirmation

+ Stochastic S/R Zones Hey, all. I have a new indicator here that displays zones on your price chart where the stochastic oscillator has moved out of overbought or oversold back into the range of the indicator that is bounded by those two levels. I know there are many support and resistance indicators on TradingView already, at least a couple of which use the RSI in a similar way as I am using the stochastic here, but I still believe this is a fairly novel interpretation of the stochastic, and it is, in my opinion, a better oscillator than the RSI to be used in this way. In addition to the zones being plotted on the chart, the indicator also, optionally, can color candles or plot shapes above candles when the 50 line is crossed, so if you want to use this as a simple momentum indicator without desire of having the below chart indicator taking up screen space, you're pretty much covered on the typical signals you might want from it (with the exception of %K / %D crosses, but there are alerts for that). Visually, it is a simple, clean indicator. There are the zones, and then candle colors or shapes if you opt to add those. These zones are actually drawn from the candle preceding the cross over or cross under. Reason for that is often times the candle of the cross is fairly impulsive and exiting a consolidation. That period of consolidation is what is important to highlight, at least as far as I am concerned. The zones themselves extend until they are broken by a candle. A support zone stops at the candle that closes below its low. Vice versa for a resistance zone. Usage is fairly simple. All the standard stochastic inputs are available for you to adjust to your heart's content. Additionally, you can choose either the %K or %D line to use as the source from which the zones are drawn, candles are colored, and shapes are plotted. Not sure if this will matter to most people, but I figured it should be made available. This should be obvious, but I feel it must be said, just because an oscillator (any oscillator) has exited overbought or oversold does not mean that there must be a reversal (or in the case of a trend pullback, continuation). The oscillator can always simply immediately move back into overbought/sold. Just because a support box prints does not mean you should mortgage your house on a long trade. In strong trends, and depending on your oscillator settings, the indicator might draw a box then only a couple of candles later break it, continuing on with the trend. This of course is telling you something, and you would be wise to listen. As with all things trading, context is important. Here are a few extra screens for you. I really hope you all like this. It's been ages since I've created anything new, and despite its simplicity and the few lines of code that make it up, it took a lot of work, as I am a poor coder. Enjoy, Scott

RSI, SRSI, MACD and DMI cross - Open source code Hello, I'm a passionate trader who has spent years studying technical analysis and exploring different trading strategies. Through my research, I've come to realize that certain indicators are essential tools for conducting accurate market analysis and identifying profitable trading opportunities. In particular, I've found that the RSI, SRSI, MACD cross, and Di cross indicators are crucial for my trading success. Detailed explanation: The RSI is a momentum indicator that measures the strength of price movements. It is calculated by comparing the average of gains and losses over a certain period of time. In this indicator, the RSI is calculated based on the close price with a length of 14 periods. The Stochastic RSI is a combination of the Stochastic Oscillator and the RSI. It is used to identify overbought and oversold conditions of the market. In this indicator, the Stochastic RSI is calculated based on the RSI with a length of 14 periods. The MACD is a trend-following momentum indicator that shows the relationship between two moving averages of prices. It consists of two lines, the MACD line and the signal line, which are used to generate buy and sell signals. In this indicator, the MACD is calculated based on the close price with fast and slow lengths of 12 and 26 periods, respectively, and a signal length of 9 periods. The DMI is a trend-following indicator that measures the strength of directional movement in the market. It consists of three lines, the Positive Directional Indicator (+DI), the Negative Directional Indicator (-DI), and the Average Directional Index (ADX), which are used to generate buy and sell signals. In this indicator, the DMI is calculated with a length of 14 periods and an ADX smoothing of 14 periods. The indicator generates buy signals when certain conditions are met for each of these indicators. 1) For the RSI, a buy signal is generated when the RSI is below or equal to 35 and the Stochastic RSI %K is below or equal to 15, or when the RSI is below or equal to 28 the Stochastic RSI %K is below or equal to 15 or when the RSI is below or equal to 25 and the Stochastic RSI %K is below or equal to 10 or when the RSI is below or equal to 28. 2) For the MACD, a buy signal is generated when the MACD line is below 0, there is a change in the histogram from negative to positive, the MACD line and histogram are negative in the previous period, and the current histogram value is greater than 0. 3) For the DMI, a buy signal is generated when the Positive Directional Indicator (+DI) crosses above the Negative Directional Indicator (-DI), and the -DI is less than the +DI. The indicator generates sell signals when certain conditions are met for each of these indicators: 1) For the RSI, a sell signal is generated when the RSI is above or equal to 75 and the Stochastic RSI %K is above or equal to 85, or when the RSI is above or equal to 80 and the Stochastic RSI %K is above or equal to 85, or when the RSI is above or equal to 85 and the Stochastic RSI %K is above or equal to 90 or when the RSI is above or equal to 82. 2)For the MACD, a sell signal is generated when the MACD line is above 0, there is a change in the histogram from positive to negative, the MACD line and histogram are positive in the previous period, and the current histogram value is less than the previous histogram value. On the other hand, a buy signal is generated when the MACD line is below 0, there is a change in the histogram from negative to positive, the MACD line and histogram are negative in the previous period, and the current histogram value is greater than the previous histogram value. 3)For the DMI a bearish signal is generated when plusDI crosses above minusDI, indicating that bulls are losing strength and bears are taking control. The indicator uses a combination of these four indicators to generate potential buy and sell signals. The buy signals are generated when RSI and SRSI values are in oversold conditions, while sell signals are generated when RSI and SRSI values are in overbought conditions. The indicator also uses MACD crossovers and DMI crossovers to generate additional buy and sell signals. When a signal is strong? The use of multiple signals within a specific timeframe can increase the accuracy and reliability of the signals generated by this indicator. It is recommended to look for at least two signals within a range of 5-8 candles in order to increase the probability of a successful trade. Why it's original? 1) There is no indicator in the library that combine all of these indicators and give you a 360 view 2)The combination of the RSI, Stochastic RSI, MACD, and DMI indicators in a single script it's unique and not available in the libray. 3)The specific parameters and conditions used to calculate the signals may be unique and not found in other scripts or libraries. 4)The use of plotshape() to plot the signals as shapes on the chart may be unique compared to other scripts that simply plot lines or bars to indicate signals. 5)The use of alertcondition() to trigger alerts based on the signals may be unique compared to other scripts that do not have custom alert functionality. Keep attention! It is important to note that no trading indicator or strategy is foolproof, and there is always a risk of losses in trading. While this indicator may provide useful information for making conclusions, it should not be used as the sole basis for making trading decisions. Traders should always use proper risk management techniques and consider multiple factors when making trading decisions. Support me:) If you find this new indicator helpful in your trading analysis, I would greatly appreciate your support! Please consider giving it a like, leaving feedback, or sharing it with your trading network. Your engagement will not only help me improve this tool but will also help other traders discover it and benefit from its features. Thank you for your support!